0
What else can I help you with?
What size bolt holds caliper bracket on 99 jeep grand Cherokee?
Depends on what type of caliper you have. They will either be Teves or akebono, if they are teves it is 18mm and akebono im not sure i think 13mm. However both will require a 7mm Allen wrench as well.
What size wrench do you use to change the battery on a 1985 jeep Cherokee Laredo?
i figured it out if any body else has this problem its a size 12 i figured it out if any body else has this problem its a size 12
What size wrench will you need for oil pan drain nut on 1996 jeep Cherokee sport 4.0?
13mm or 14mm
What size wrench is needed to remove brake caliper bolt 2005 Pontiac vibe?
My girlfriend has a 2006 escape and I ran into the same problem trying to change her brakes and none of the Allen wrenches fitting. The '06 needed a 9 mm Allen, so I'm assuming the 05 would need the same?! Good Luck! ---------------------------------- I have a 2006 Tribute, 4wd, discs on front and back. I just did the brakes today. Front calipers are 9mm, back ones are 7mm.
How long is a 44 violin?
The size of a Violin is measured by the size of the body only. A 4/4 ("Full Size") Violin tends to have a body size of around 14 inches. As violin sizes are non-standardized, this size will vary depending on who made the violin, when it was made and where.
What size Allen wrench for 2002 escape front caliper?
7mm Allen wrench
What is the recommended allen wrench size for bike pedals?
The recommended allen wrench size for bike pedals is typically 6mm.
What size allen wrench is needed for bike pedals?
The size of the allen wrench needed for bike pedals is typically 6mm.
What size rounded allen wrench do I need for this task?
To determine the size of the rounded Allen wrench needed for the task, measure the diameter of the screw head or the hole it fits into. Match this measurement to the corresponding Allen wrench size.
What is the size of the m6 allen wrench needed for this particular task?
The size of the m6 Allen wrench needed for this task is 6 millimeters.
What is the recommended allen wrench size for adjusting the brakes on a bike?
The recommended allen wrench size for adjusting bike brakes is typically 5mm.
What size Allen wrench and open end wrench for brake pads on 1999 Toyota Corolla?
There is no Allen wrench, I believe it is 14 mm open wrench.
What size of allen wrench is needed for a 10.9 bolt?
To tighten a 10.9 bolt, you will need a 6mm allen wrench.
What Size Allen wrench used for change brakes on 1995 Chevy pickup?
3/8 inch Allen wrench.
What size Allen wrench do you use to remove caliper slide bolts on the front of a ford expedition?
9mm Allen wrench
What size Allen wrench for 6.0 liter powerstoke diesel water separator?
it is a 6mm allen wrench. A ball type allen works best to get to the plug.
What size Allen wrench do you need Lincoln Navigator front brake calipers?
You need 3/8 Allen key.
