answersLogoWhite

0

Yes. Dragon Naturally Speaking dictation software is supposed to be able to get text from a recording, though in my opinion, it make far too many mistakes. If it is a matter of dictation recordings, it may be worth it to higher someone that is learning to be a court reporter to transfer the recordings to text.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Music & Radio

How TO turn off mute on Mercedes clk 320 RADIO?

To turn off mute on a Mercedes CLK 320 radio, locate the "MUTE" button on the radio or steering wheel controls. Press the button once to unmute the audio. If the audio is still muted, check the volume knob and turn it up to ensure sound is restored. Additionally, you can also try toggling the radio source or turning the system off and back on.


Audio cuts out when you turn up radio?

you are exeeding the factory amp and speaker ratings... its so you dont fry the sterio or blow the speakers


How do you use Sirius Audiovox Sirck1?

To use the Sirius Audiovox Sirck1, first ensure it is properly connected to a power source and your vehicle's audio system. Turn on the device and tune it to the desired SiriusXM channel using the control buttons. You can navigate through channels and presets to find your preferred stations. Additionally, make sure to subscribe to SiriusXM services for full access to the available channels.


What is a good rod for banjo minnow?

A good rod for banjo minnow is a fishercent that have a voicebox button and a audio music turn-on radiobox and the instructions for fishing,as you catch a biggo fish,it's you can make it to keep.


Why won't beats pill turn on?

If your Beats Pill won't turn on, it could be due to a dead battery. Try charging the device for at least 30 minutes using the appropriate cable and adapter. Additionally, ensure that the power button is functioning and not stuck. If it still doesn't turn on, there may be an internal issue that requires professional repair.

Related Questions

Why do T-Mobile cell phones send text messages numerous times?

According to T Mobile to take care of this problem, you need to delete all the text messages on your device. Turn the device off and then turn the device back on.


How do you avoid loop back audio in recording?

Not quite sure what you are referring to. If you mean FEEDBACK....turn you speakers down to zero when recording with a microphone...just use headphones to monitor the signal.


Is Unidirectional microphones are best for recording a conference call when you need to pick up the voices of multiple speakers?

The best solution is to use a line recorder that can take the audio and convert it to a line level output that can be sent to a recording device. There are some USB recording devices on the market that serve this purpose well that cost under 200 bucks. The other solution is if you are using a conference call service, most services today are offering a recording option that you can just turn on while the conference is in session. Then you can download the audio file to your PC to listen to t.


What situation are iPod microphones best suited for?

IPod microphones are best suited for recording audio directly to the Ipod. The high performance microphones like alesis ProTrack or Belkin GoStudio can turn the Ipod into a full-fledged mobile recording studio.


How do you turn on Bose solo 10 without remote?

To turn on the Bose Solo 10 without the remote, you can use the power button located on the soundbar itself. This button is usually found on the top or side of the device. If the soundbar is plugged in and connected properly, pressing the power button should activate it. Alternatively, if the soundbar is set to automatically turn on when it detects an audio signal, playing audio through a connected device can also power it on.


How can I connect an XLR microphone to my audio interface?

To connect an XLR microphone to your audio interface, you will need an XLR cable. Plug one end of the XLR cable into the microphone and the other end into the XLR input on your audio interface. Make sure to turn on phantom power if your microphone requires it. Adjust the input levels on your audio interface and computer settings to ensure proper recording levels.


How do you Turn speakers on?

You can turn on your monitor's speakers by inserting the audio jack into its audio-in port. If no audio is heard, ensure your computer's system volume is turned up.


How do you turn the volume on or off for your browser?

To turn the volume on or off in your browser, you can use the audio control features of your operating system or browser. Most browsers allow you to right-click on the tab playing audio and select "Mute Tab" to turn off the sound, or "Unmute Tab" to turn it back on. Alternatively, you can adjust the volume using the media controls on your device, or look for a volume icon in the browser's user interface if available.


Can you give me a sentence with the word audio?

i'm going to turn up the audio.


How do you get your cursor to turn into a vertical line in a text box?

To make your cursor turn into a vertical line (also known as an I-beam cursor) in a text box, simply place your mouse pointer over the text box where you want to type. The cursor will change automatically to the I-beam shape, indicating that you can start typing or select text. If you're using a touch device, tapping the text box will usually bring up the keyboard and place the cursor at that location.


How do you record on the Presidian DVD recorder?

To record on a Presidian DVD recorder, start by inserting a blank DVD into the tray. Turn on the device and select the "Record" option on the menu. Choose your desired recording source, such as TV or video input, and press the "Record" button to begin capturing content. To stop recording, press the "Stop" button, and the DVD will finalize the recording for playback.


How can you make recod using presentation tube?

Before using the recorder ensure that you have: 1. MS PowerPoint (2000/03/07/10), DirectX (9.0 or later), and Microsoft Media Player (10.0 or later) installed in your computer. 2. Your PowerPoint presentation saved in your local or mobile drive in PPT, PPTX or PPS format. 3. A Webcam driver and camera connected to your computer. Just open your presentation and start present and everything in your presentation will be recorded, including: transitions, animation, slide timing, sound effects, mouse movement, embedded video & audio, compelling elements of live presentation, on-the-fly pen annotation, and cursor highlights. To record your presentation run the recorder to find your webcam activated and started automatically, then: 1. Click the "Open" toolbar button to load your PowerPoint presentation into the recorder display window. 2. Adjust your camera and mike devices and video format settings from "Camera Settings" in the left-hand explorer bar. 3. Click "Options" to adjust your audio and video options (e.g., quality, hardware, and other recording options). 4. When ready, click the "Record" button to select the video format (WMV, AVI, or FLV) and destination folder and start recording. 5. Use the slide controls toolbar buttons (First, Previous, Next, Last) to navigate forward and back through the presentation. 6. Toggle (switch) between presenter's webcam, slides, text, drawing, and web browser while recording using Cam, Slides, text, Draw, and Web toolbar buttons. 7. You can also annotate on your slides by clicking on the annotation tool and then using any mouse device or graphic tablet to draw or write with. 8. Use the drawing board (similar to MS Paint) to draft out or explain an idea using the drawing tools in the Draw pane or the simple text editor in the Text pane. 9. Use the camera position control at the right-bottom of the screen to change the camera view and position. Click the active position (red color) again to hide the camera view. 10. Click "Pause" to stop recording temporarily and click again "Resume" to continue recording. 11. Click "Stop" to end recording and get your video file (e.g., video1.wmv) and video data file (.zip) saved in your destination folder. Adjusting recording options 1. Click the "Options" toolbar gear button to open the Presentation Record Options window. 2. Adjust the video quality, video bitrate, audio channels, and audio bitrate. 3. To enhance the recording performance click "Turn on/off" button to turn on/off your Windows graphics hardware acceleration. 4. Uncheck/check "Use Recorder Hardware Acceleration" box for better recording performance. 5. Check "Record Mouse Pointer" box to record mouse pointer while recording and vice versa. 6. Change Frame Rate (frame per second) to enhance the quality of your video output. 7. Select your preferred audio device and audio inputs.