I might not be of much help as I'm a guitarist, but I played in bands years back and the drummer had a key that looked like a radiator key and he used it to adjust the snare drum. He used to hit the snare with one drum stick and use the key to adjust the nuts on the top of the rim, it changed the sound. Also he used to adjust the springs on the underside of the drum (not sure how). I think it's the springs that give it the "Snare" sound. My guess is that the skin maybe too tight on your drum and/or the springs are not "Rattling" enough. As I said, I'm a guitarist and the drummer couldn't play my guitar. Hope this helps.
Over the 700 year history of the snare drum, it is basically pretty much the same thing now as it was then. So what were the changes over these years? The biggest changes were:The snare on the bottom of the drum that gives it its unique sound changed from a single snare to a multi-snare.The drum hoops or rims are made of metal and are fastened to the shell with tension rods. It can be tuned to much higher pitches than possible in its early years.A snare release or throw-off was later introduced and also made adjustable.Snares can now be found in various materials such as woods, metals or acrylics.A vast range of drum heads are available.
The above answer seems to be correct, but only in theory. The snare drum does and must have a pitch. They need to be tuned up and kept at the right pitch as they become broken in. In these cases we are not concerned with how tight the drum is, but how even is the tension. Once the drum is evenly tensioned it can be brought up to pitch. Using the Key, gradually tighten the tension rods until the pitch of Ab - B is achieved for a 5 inch drum. Use a piano to verify. Once to pitch, turn the drum over and repeat the process for the bottom head. Tighten until the bottom head reaches a perfect fourth to a perfect fifth higher than the top head. This can be difficult, no distractions allowed.. Turn on the snare strainer and reajust the tension if necessary. No, snare drums do not have a pitch, as like all drums, the snare, when hit, produces a multitude of different frequencies, and as certain notes have certain distinguishable frequencies, you cannot tune it to be a certain note.
I'm assuming you mean for snare drum. If that is true there are two basic grips. There is a traditional grip(older) and matched grip(newer). A basic matched grip is made by extending your hand like you are about to shake hands with someone and then just "shaking hands with the stick". Your thumb should be on the side of the stick pointing towards the bead(the small tip that you hit on the drum). Then you just close the four remaining fingers around the stick comfortably. You should have white knuckles from gripping it to tightly but it also shouldn't feel like the stick is going to fall out of your hand. With a standard snare stick the butt end(the end you don't hit on the drum) should be sticking out about 1 inch from your closed hand. If you are standing, the snare drum should be at about belt height with the snare lever(how you turn the snares on and off) directly in front of you on the closest side. To make a basic stroke put the tips of both sticks on the center of the drum head. They should make the shape of a piece of pie(about a 70 degree angle but it's fairly variable from player to player). Then using the wrist and some propulsion from the fore-arm strike the bead of the stick on the center of the snare drum.
Two stores that sell sets of snare drums suitable for a marching band are Amazon and Best Buy. A dedicated agent will be happy to help you find more information on their official website.
i dont know but will you help i am doing this in my phse
Drum notation uses different symbols to represent different drum sounds. For example, a circle represents a hit on the snare drum, while an "x" represents a hit on the hi-hat. A line connecting two notes indicates a drum roll. Practice reading and playing these notations to improve your drumming skills.
well i think that onea quaver with the hi - hat and then bass, snare, bass, bass, snare, repeatedly (add ytour own drum fill if u lyk) or all the small things which is the same but its just a bar instead. plus you onl;y hit the hi hat once when u do the bass, bass part and my faviroute is simple but sounds the best is open hi hat bar kick snare(reapeatedly and also add ur own drum fill) hope these help bye
Over the 700 year history of the snare drum, it is basically pretty much the same thing now as it was then. So what were the changes over these years? The biggest changes were:The snare on the bottom of the drum that gives it its unique sound changed from a single snare to a multi-snare.The drum hoops or rims are made of metal and are fastened to the shell with tension rods. It can be tuned to much higher pitches than possible in its early years.A snare release or throw-off was later introduced and also made adjustable.Snares can now be found in various materials such as woods, metals or acrylics.A vast range of drum heads are available.
To achieve a crisp and dynamic sound when playing the rimshot snare, you can use techniques such as hitting the drumstick on the rim and head of the snare drum simultaneously, applying consistent pressure, and striking the drum with controlled force. Experimenting with different angles and velocities of the drumstick can also help enhance the sound.
To achieve a crisp and articulate sound on the snare drum rim, you can use techniques such as rimshots, cross-sticking, and practicing proper hand positioning and grip. Experimenting with different stick angles and pressures can also help enhance the clarity of the sound produced.
To keep a snare drum skin in good condition, regularly clean it with a damp cloth, avoid over-tightening the drum, and store it in a cool, dry place when not in use. Additionally, replacing the skin when it shows signs of wear can help maintain optimal sound quality.
To play snare notes effectively in a drumming performance, drummers can use techniques such as proper grip, wrist control, and consistent stick height. Additionally, practicing rudiments, maintaining good posture, and focusing on dynamics can help improve snare drum performance.
i think that u hit them with your hands also u can hit in the middle for a deap sound or on the edge for a hollow sound it depends where u hit the bongo drum?? thank u for asking me 2 help u answer this question talk 2 u soon ":):) i think that u hit them with your hands also u can hit in the middle for a deap sound or on the edge for a hollow sound it depends where u hit the bongo drum?? thank u for asking me 2 help u answer this question talk 2 u soon ":):)
To effectively play a high tension marching snare drum, drummers can use techniques such as proper grip, wrist control, finger control, and consistent practice to develop speed, accuracy, and dynamics. Additionally, focusing on posture, breathing, and mental focus can help maintain endurance and precision during performances.
To isolate the drums from a song, you can use audio editing software that has a feature called "drum isolation" or "drum extraction." This tool can help you separate the drum sounds from the rest of the music in the song.
To effectively play a high tension snare drum for maximum impact and clarity in a performance, drummers can use techniques such as proper grip, wrist control, dynamic range, and precise stick placement on the drumhead. Additionally, practicing rudiments and maintaining a consistent tempo can help achieve a powerful and clear sound.
To create unique drum beats in GarageBand, you can experiment with different drum sounds, adjust the tempo and rhythm, layer multiple drum tracks, and use effects like reverb and distortion. Experimenting with different patterns and combinations can help you create original and interesting drum beats.