0
Depends on how bad it is, is the more obvious answer. It also depends on whether you are doing it, and keeping it, or refinishing to sell it. Does it need a stripping and restain/sealer or does it need wood repair due to chips or cracks on the veneer? Bottom line is, if you are doing it for yourself, go for it. If you are looking to make a buck, I'd say sell it as is, and let a new owner worry about it, if it bothers them.
What else can I help you with?
How do you get a high gloss finish on a guitar?
to provide a high gloss finish (while making a guitar), first make sure there is no orange peel, or any bumps in the initial color coats of the finish. there should be about 4-5 coats of the said color finish on the guitar. sand the color lightly, and apply the gloss lacquer, about 5-6 coats. Sand the finish with 400, 1000, and 2000 grit sand papers in that order. you should see some of the shine start in this, but not in the mirror- like gloss usually seen on high gloss finishes. finally, take some wax and a buffer, and buff the sanded finish until it is buffed to a mirror-like sheen.
What are the three types of finishes that surgical instruments can be made of?
bright ( or mirror) finish instruments, satin finish instruments, and ebony finish instruments
What is a Hollywood Finish?
Meaning a perfect finish to the movie. e.g they sailed away into the sunset... It just means a wonderfull (hollywood) finish. it's just a saying there isn't actually a specific finish people are reffering to when they say that.
What is the difference between FG700MS and FG700S guitar?
They are identical with the only exception being the finish. The FG700MS has a matte/satin finish, while the FG700S has a gloss finish.
When was By Heart - Matt Finish album - created?
By Heart - Matt Finish album - was created in 1993.
How can Howard Restore-A-Finish help restore the finish of your furniture?
Howard Restore-A-Finish can help restore the finish of your furniture by blending out scratches, blemishes, and other imperfections, while also adding color and depth to the wood. It can help rejuvenate the original finish and bring back the beauty of your furniture without the need for stripping or sanding.
How can I use Howard's Restore-A-Finish to restore the finish of my furniture?
To use Howard's Restore-A-Finish to restore your furniture's finish, first clean the surface, then apply the product with a soft cloth in a circular motion. Allow it to penetrate for a few minutes, then wipe off any excess. Repeat if necessary for desired results.
How can I effectively restore the beauty of my hardwood floors through refinishing?
To effectively restore the beauty of your hardwood floors through refinishing, you should start by sanding down the old finish, repairing any damage, and applying a new coat of finish. Make sure to follow the manufacturer's instructions and use the right tools and products for the job. Sanding should be done carefully to avoid damaging the wood, and the finish should be applied evenly for a smooth and glossy look.
How can I effectively restore the beauty of my hardwood floors through the process of resurfacing?
To effectively restore the beauty of your hardwood floors through resurfacing, you should start by sanding down the existing finish to remove scratches and imperfections. Then, apply a new coat of finish to protect and enhance the natural beauty of the wood. Make sure to properly clean and prepare the floors before resurfacing to ensure a smooth and even finish.
What should I do if the ruined finish on my faucet needs to be fixed?
To fix the ruined finish on your faucet, you can try using a metal polish or a refinishing kit specifically designed for faucets. Follow the instructions carefully to restore the finish. If the damage is extensive, consider replacing the faucet for a long-term solution.
How can I effectively restore a finish on my furniture to bring it back to its original beauty?
To effectively restore a finish on your furniture and bring it back to its original beauty, follow these steps: Clean the furniture thoroughly to remove dirt and grime. Sand the surface to remove any existing finish and smooth out imperfections. Apply a wood stain or finish that matches the original color of the furniture. Allow the finish to dry completely before applying a protective topcoat. Buff the surface with a soft cloth to bring out the shine and restore the furniture's beauty.
How can I restore old pine floors to their former glory through refinishing?
To restore old pine floors, start by sanding the surface to remove old finish and imperfections. Then, apply a wood stain or finish of your choice to enhance the natural beauty of the wood. Finally, seal the floors with a protective coating to restore their shine and durability.
How can I restore faded wood furniture to its original condition?
To restore faded wood furniture, start by cleaning the surface with a mild soap and water. Sand the furniture lightly to remove any remaining finish. Apply a wood stain or finish to restore the color and protect the wood. Finally, polish the furniture to bring out its natural shine.
What are the steps that you would take in order to do a system restore?
To perform a Windows 7 system restore, first navigate to Start--> All Programs --> Accessories --> System Tools and click on the "System Restore" icon. Click "Next" to choose a date to restore the computer to and then click "Finish" to begin the system restore.
How can I effectively restore a finish in golden oak using Howard Restor-A-Finish?
To effectively restore a golden oak finish using Howard Restor-A-Finish, follow these steps: Clean the surface with a gentle cleaner to remove dirt and grime. Apply Howard Restor-A-Finish with a soft cloth, following the wood grain. Allow the product to penetrate the wood for a few minutes. Wipe off any excess product with a clean cloth. Repeat the process if necessary to achieve the desired finish. Finish by applying a coat of Howard Feed-N-Wax to protect and enhance the restored finish.
What is Pokemon trainer final smash?
Triple Finish http://www.gamefaqs.com/console/wii/file/928518/52220
Can you use dawn to clean leather car seats?
yes and when dried, use hand lotion to restore the finish
