answersLogoWhite

0

What else can I help you with?

Continue Learning about Music & Radio

Rear turn signal bulb on grand prix?

The number needed should be in your manual, if not, remove the bulb & there should be a number on the base. When you go to a parts store, just look for the same number.


What symbol on a regulatory marker indicates a dam or stump?

On a regulatory marker, a dam or stump is typically indicated by a symbol of a small triangle with a flat base at the bottom, often accompanied by additional markings or colors that denote specific regulations or warnings. This symbol alerts boaters and other waterway users to potential hazards. Always consult local waterway signage for precise information, as symbols may vary by region.


What handoff detection?

In a cellular telephone network, handoff is the transition for any given user of signal transmission from one base station to a geographically adjacent base station as the user moves around. In an ideal cellular telephone network, each end user's telephone set ormodem (thesubscriber's hardware) is always within range of a base station. The region coveredby each base station is known as its cell. The size and shape of each cell in anetwork depends on the nature of the terrain in the region, the number of base stations,and the transmit/receive range of each base station. In theory, the cells in anetwork overlap; for much of the time, a subscriber's hardware is within range of morethan one base station. The network must decide, from moment to moment, which basestation will handle the signals to and from each and every subscriber's hardware. Each time a mobile or portable cellular subscriber passes from one cellinto another, the network automatically switches coverage responsibility from one basestation to another. Each base-station transition, as well as the switching processor sequence itself, is called handoff. In a properly functioning network, handoffoccurs smoothly, without gaps in communications and without confusion about which basestation should be dealing with the subscriber. Subscribers to a network need not doanything to make handoff take place, nor should they have to think about the process orabout which base station is dealing with the signals at any given moment.


How do you use the effects loop in the back of your Fender Performer 650 amplifier?

Plug a 1/4" cable from your selected effect's pedal output to the amp's loop input, then plug another 1/4" cable from the amp's effect loop output to the effect pedals input completing the loop.


What is a bace guitarest?

a guitarest that plays base.a base has a low THRUM sound. a guitarest that plays base.a base has a low THRUM sound. a guitarest that plays base.a base has a low THRUM sound. a guitarest that plays base.a base has a low THRUM sound.