answersLogoWhite

0

What do you mean by settings? If your mean the air/fuel ratio turn the screw all the way in then turn out about 1/4 turn out this will get you close to where you need to be.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What type of transmission oil go in 2006 Honda 400 4x4 rancher at?

2004 Honda rancher tranimission oil


Parts diagram for trx400 honda rancher 2004?

You can obtain a parts diagram for your 2004 Honda Rancher at most Honda dealerships. The parts diagram can also be found at most auto-parts stores.


How do you change the transmission oil of a 2004 Honda 350 rancher?

The Honda Rancher transmission shares the oil from the engine. Make sure to use the correct oil and always replace the oil filter when changing the oil.


Where can you find a parts diagram for a 2004 Honda rancher at carburetor?

www.cyclepartsnation.com they have all diagrams for all bikes on their parts page


How do you fix a bad manual shifter shaft seal on a 2004 Honda 350 rancher es?

Take it to your local bike shop


Where is the fuel filter on a 2004 Honda rancher?

On a 2004 Honda Rancher, the fuel filter is typically located in the fuel tank, integrated with the fuel pump assembly. To access it, you'll need to remove the seat and the rear cover, then disconnect the fuel line and remove the fuel tank. The filter itself is often a small screen or mesh filter that can be cleaned or replaced if necessary.


Where is the oil filter on a 2004 Honda rancher?

On a 2004 Honda Rancher, the oil filter is located on the right side of the engine, near the bottom. It is typically positioned above the oil drain plug and can be accessed from the side of the ATV. To replace it, you'll need to remove the old filter and install a new one, ensuring to follow the manufacturer's specifications for oil type and capacity.


How much engine oil is in a 2004 Honda rancher?

The 2004 Honda Rancher typically requires about 2.5 quarts (or approximately 2.4 liters) of engine oil when using a new oil filter. If you are changing the oil without replacing the filter, it may need around 2.3 quarts (or about 2.2 liters). Always consult your owner's manual for the most accurate specifications and recommendations.


What is the oil capacity of a Honda 2004 rancher at 400?

The oil capacity of a 2004 Honda Rancher 400 is approximately 2.5 quarts (or about 2.4 liters) when using a filter, and around 2.1 quarts (or about 2.0 liters) without a filter change. It's important to use the correct type of oil, typically 10W-40, for optimal performance. Always check the owner's manual for specific recommendations and maintenance guidelines.


Where do you add coolant on your 2004 honda rancher?

To add coolant to your 2004 Honda Rancher, locate the coolant reservoir, which is typically found near the radiator. Remove the cap and check the coolant level; if it's low, add a mixture of antifreeze and water according to the manufacturer's specifications. Ensure the engine is cool before adding coolant to avoid burns. After adding, securely replace the cap and check for any leaks.


Troubleshooting a 2004 Honda rancher ATV angle sensor?

To troubleshoot a 2004 Honda Rancher ATV angle sensor, first check the wiring and connectors for any visible damage or corrosion. Use a multimeter to test the sensor's resistance and ensure it falls within the manufacturer's specifications. If the readings are off, consider replacing the sensor. Additionally, inspect the ATV's ECU for any error codes that may indicate other related issues.


Where is the fuse for the head lights on a 2004 Honda rancher 400 ATV?

The fuse for the headlights on a 2004 Honda Rancher 400 ATV is located in the fuse box, which is typically found under the seat or near the battery. To access it, remove the seat and locate the fuse box cover. Inside, you'll find the headlight fuse, which is usually labeled; check the owner's manual for specific details and the correct fuse rating. If the headlights are not working, inspect the fuse and replace it if necessary.