0
The ones at end of a guitar (on the headstock) are called tuners, tuning pegs or tuning posts. The ones on the front of the body are the control pots/knobs (volume, tone).
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is a guitar neck ridge?
Its where the strings are stretched over from the tuning knobs. Its sometimes called the 'zero' fret.
Cant turn volume all the way down on bass guitar?
Try turning down all knobs on your bass. Some basses have two volume knobs, one for each pickup.
What is a machine head on a guitar?
Not that my name references the thing your talking about, but a machine head refers to the metal knobs on the stock of the guitar that you twist in order to tune a guitar and that is what the strings are wrapped around. My name refers to the band.
What is a hollow guitar called?
A hollow guitar is called an Acoustic guitar.
How do you remove Tone and Volume Knobs from a guitar?
On my Les Paul, you just pull out on the knob and it pops off. Some knobs my have a small screw on the side that needs to be loosened first, (but not all the way out or you might loose it) and it will come off.
What are guitar knobs used for on a guitar?
There are two knobs on a guitar. One is the tone knob, which is used when tuning the guitar right pitch and sound you want out of the guitar. The other is for your volume, which is obviously used to toggle between the loudness or quietness of the guitar.
What is a guitar neck ridge?
Its where the strings are stretched over from the tuning knobs. Its sometimes called the 'zero' fret.
How do you change guitar strings?
The answer is...... see those little twisty things at the end of your guitar? Those are called the knobs. Hold down the string you want to tune up and twist the correct one. If you don't understand what I'm saying, look in your beginners book. Have fun playing, Tobyhope07
What is the head stock on a guitar used for?
On the head of the guitar there are the tuning knobs. If you tighten them, you get a higher pitch. If you loosen them you get a lower pitch.Hope this helps :D
How are you supposed to tune your guitar?
You turn the knobs to change the pitch. I would reccomend buying a guitar tuner that will show if the string is sharp or flat.
What are the small swellings at the end of a neuron called?
synaptic knobs (or axon terminals<--more commonly used name)
Cant turn volume all the way down on bass guitar?
Try turning down all knobs on your bass. Some basses have two volume knobs, one for each pickup.
How do you tune your acoustic guitar?
You can buy anelectric tuner that tells you if it's the right sound, if you're good at music you can do it by yourself or you can ask some one else who knows how. You tune a guitar by turning the silver knobs at the end of the neck. CAUTION!: If you turn it too tight, you can snap the strings!!!
What is a machine head on a guitar?
Not that my name references the thing your talking about, but a machine head refers to the metal knobs on the stock of the guitar that you twist in order to tune a guitar and that is what the strings are wrapped around. My name refers to the band.
What are old T.V. knobs called?
cannon
What are the knobs on the tuba french horn trumpet called?
The knobs on the tuba and Trumpet are called valves. The knobs on a french horn are often called valves or rotors. You use valve oil on the tuba and trumpet, while you use rotor oil for the french horn.
What are the knobs on the tuba and french horn and trumpet called?
The knobs on the tuba and Trumpet are called valves. The knobs on a french horn are often called valves or rotors. You use valve oil on the tuba and trumpet, while you use rotor oil for the french horn.
