0
What cable would you need to connect a behringer mx400 mixer to a behringer vt100fxh head amp?
Edwardhollowayiv
A HDMI cable is used to connect a behringer mx400 mixer to a behringer head amp. This can be bought at just about an big store.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you connect your Behringer 1832FX to your PA system?
Mixer main out (two XLR connectors) to PA amplifier inputs.
Why ddmm4000 behringer mixer start blinking?
You most likely have some mode on that has either uses tap tempo or then you have some sort of "vegas mode" on.
How do you connect the Microphone mxl 990 to your Mac without using a Mixer?
Use a recording interface
How do I hook up the Realistic Mixing Console Model No 32-1200b to the Tascam DP-008 then record it?
Connect the RCA main outputs of the mixer to the Input A and B of the Tascam using an RCA to 1/4" adapter cable. Arm 2 tracks and record.
When was Xbox Music Mixer created?
Xbox Music Mixer was created on 2003-12-01.
How do you connect Behringer Feedback Destroyer to mixer?
mixer main out TO behringer feedback destroyer input TO speakers
How Do you wire a USB condenser Microphone to a Behringer Xenyx 302 Mixer?
You cannot connect a USB microphone to a mixer. It must be connected to a computer. The Behringer 502 can accept any dynamic or condenser microphone with an XLR connector .
How do you connect your Behringer 1832FX to your PA system?
Mixer main out (two XLR connectors) to PA amplifier inputs.
How do you hook up Behringer mixer to Amplifier?
You connect the mixers main outputs to the inputs of the amplifier and the outputs of the amplifier to speakers
How TO you find a new power cord for a behringer 1202FX MIXER?
Search for Behringer AC Adaptor.
Is Behringer DX626 mixer Ipod compatible?
You need a 1 x miniplug to 2 x rca connector cable to use ipod with the DX626
You Have a Behringer audio mixer and you want to know what effects processor to get?
The Behringer Virtualizer 3D FX2000 if you have a limited budget, the TC Electronic FireworX if you have an unlimited budget.
How do you connect numark mixdeck universal and 2 behringer speaker B415DSP and to your computer What also do you need?
1) mixer to speakers: Numark main XLR-output to Behringer speaker XLR-input 2) sound from computer: computer line out to a free input on the Numark 3) sound to computer: use the USB cable connector on the Numark (might also work the other way around, not 100% sure)
How much would it cost to buy a Behringer mixer?
The Behringer is a digital mixer that mixes music. The prices range from sixty-four dollars to two thousand nine hundred and ninety nine dollars depending on the make or model chosen.
Help you set up your home studio i have a behringer 802 mixer a uca222 audio interface a c-1 mic and a toshiba computer i need to know where to plug in all the wires to record?
1) Microphone to XLR-cable to Mixer XLR-input 2) Mixer main out or tape out to interface with RCA cable 3) Interface to computer with USB cable 4) You need to install drivers for the interface and you also need a recording software
What additional items are needed for surround sound quality that is not included with the Astro A40s and mixer?
Nothing extra is needed. You need to connect the mixer to the game console with the included TOSlink optical cable.
How do you connect your speakers to a mixer?
The easy way is to just buy a mini-jack to RCA cable. Something like $1 cost.
