DISP on a radio typically stands for "Display." It refers to a function or button that allows users to toggle between different display options or view additional information on the radio's screen, such as frequency, signal strength, or current settings. This feature enhances user experience by providing relevant data at a glance.
Turn your car on, so that the radio can be turned on and off. Then turn your radio off. After is it off, push the clock button and while holding clock, use seek to change the hour and tune to change the minutes.
Fail 5 means mean that the radio is not detecting the COMCSEC CCA. This is usually due to the radio's COMSEC knob being in the PT position.
Do you mean 'Who made the first radio?'? Several people were experimenting with radio transmission, among them Marconi and Hertz.
to monitor radio without wire.. that's all how is it..................BABA
.............................
Displacement
The abbreviation of 'disp' can mean dispute, disposition, or dispensary. DISP can stand for Dispute Resolution, Disability Income Security Program, or Defense Industry Security Program.
Turn key to accessory position. Turn radio on. Hit Disp button on right. Display changes to clock. Hit Disp again to make the time flash. Use the radio scan back arrow to change the hour. Use scan forward to change the mins. When the time is set hit Disp again to start the clock.Hope this helps !
This is what I did:Turn the key to the accessory position. Turn on the radio. Hit the Disp button on the right. When the clock comes up, hit Disp again to make it flash. Use the radio scan back button for hour and use scan forward for mins. Once set hit disp again to start the clock.Hope this helps : )
Turn the car on and have the radio off. Push and hold the DISP button on the radio until SETTINGS is displayed on the radio display. From there using the tune button (left-right) find the auto lock option, then use the (1-2) button to select the auto lock option you want. When you have found the setting you want, push the DISP button. Then use the tune button till you get to exit and press DISP.
power the radio off, then press and hold the disp. button until settings appear once settings appear press the # 1 on the radio and scroll until you see tire mon. press the disp button again and it resets
With your ignition in the on position, but the car not started. Press and hold the disp button on the radio for about 5 seconds. On the radio the word settings will appear at which point you can scroll through the setting by pushing the next or prev buttons. When you get to tire pressure you can reset it by pushing the disp button.
disp.
With the 2004 Monte Carlo radio off, turn the ignition to run. Press and hold the radio tune disp button to enter the menu. Scroll down to tire mon setting. Press prev button. Now press tune disp. A chime will ring to indicate the reset. Scroll to exit and leave the menu.
Radio off. Hold DISP button while using CD tune/track buttons for minutes/hours
DISP
disp.