oe code means Original Equipment Code
If you mean not so much harmony, then I would say duet or trio or even quartet. If you mean there is background harmony, then solo or duet or trio or quartet with accompaniment. If you mean that there are some notes that sound as if they exist but they don't, then they're called ghost notes.
Drive Motor Tachometer Error The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes. Potential Causes • Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and the Central Control Unit (CCU) • Check the Drive Motor • Check the MCU • Check the Wire Harness
if by team you mean the singers of the duet, then it was Faith Hill and her husband, Tim McGraw.
Basicaly it is where two people sing together or play a instroment together or when one person plays an instroment and another sings
Misfire code
What does f 70 mean on a whirlpool duet steam model wfw9550wl00
what does f70 code mean on a duet model wed9600tao dryer
it means your washers broken
power failure
commuication error between ccu and mcu
E1 or E2 Thermistor Failure The dryer will not operate if the exhaust temperature drops below 18 degrees F. or exceeds 250 degrees F. When the thermistor circuit is open (>50K ohms), the error code E1 flashes in the display. When the thermistor circuit is shorted (<500 ohms), the error code E2 flashes in the display. Normal thermistor resistance values: 60 degrees F. - 15.3K ohms. 70 degrees F. - 11.9K ohms. 80 degrees F. - 9.2K ohms.
The F23 error code on a Whirlpool Cabrio electric dryer indicates a problem with the dryer’s communication system, often linked to a malfunction in the control board or wiring. It may also suggest issues with the temperature sensor. To resolve this, you can try resetting the dryer by unplugging it for a few minutes, but if the error persists, it may require professional diagnosis and repair.
I am getting that beep with an f as well. Would love to know the answer too. :0(
code 5d
The F33 error code on a Whirlpool Duet washer typically indicates a problem with the door lock or lid latch system. This could be due to a faulty door lock mechanism, a wiring issue, or a malfunctioning control board. To resolve the error, check the door latch for obstructions, ensure it closes properly, and inspect the wiring for any damage. If the problem persists, professional service may be needed to diagnose and repair the issue.
it is saying that the motor control unit isn't functioning properly. this could be the MCU itself or the wires to the motor or the pressure (water level) switch. it also could be the motor or the pressure switch itself failing.
Auto Dry