0
What else can I help you with?
Who has broken a string on stage?
Many entertainers have broken a string on stage.
How much do you sell a blue violen with a broken string?
just get a replacement string, and replace the string, then sell the violin. that can almost double the value
How do you fix a broken guitar string?
Dependent upon where the string is broken, it is possible to fix it. If it has broken at the tuning peg, chances are you'll have to replace it unless, there is enough string on the "long" side of the break to wind around the tuning post. If the string has broken near the bridge, you can take the string out, feed the broken end through the hole in the middle of the ball-end as so: (broken end) (ball-end)----------------------------- >> O| (bit of broken string still attached)Then, you must double back the string and twist it until the ball-end is securely fastened in the "noose" you have made with the string. Rewind the string onto the guitar, and assuming you had enough string to perform this operation, it should work fine.
What is the group of instruments referred to as the backbone of the orchestra?
i thonk its the string section, probably the cellos
Do violin bows work on guitars?
It would only be able to play the high or low e string, but the low e string is probably too thick.
Who has broken a string on stage?
Many entertainers have broken a string on stage.
When was The Broken String created?
The Broken String was created on 2007-07-24.
How can I fix a broken string on a guitar?
To fix a broken string on a guitar, you need to remove the broken string, replace it with a new one of the same gauge, and tune it to the correct pitch.
Can a broken string still work?
Nope. A broken String is not useful anymore. It should need replacement.
How easy is it to replace a broken viola string?
A broken viola string should be replaced by a professional to ensure proper tunning.
How can I fix a broken electric guitar string?
To fix a broken electric guitar string, you need to remove the broken string, replace it with a new one of the same gauge, and tune it to the correct pitch using the tuning pegs.
How can I fix a guitar string that has broken?
To fix a broken guitar string, you will need to replace it with a new one of the same gauge. First, remove the broken string by loosening the tuning peg and unwinding it. Then, insert the new string through the bridge and the tuning peg, and tighten it by turning the tuning peg until the string is in tune. Cut off any excess string and tune the string to the correct pitch.
How do you tune a guitar with a broken e string?
from the bottom E-string and just do it backwards
How can I fix a snapped guitar string?
To fix a snapped guitar string, you will need to remove the broken string, replace it with a new one of the same gauge, and tune it to the correct pitch. Be careful when removing the broken string to avoid damaging the guitar.
How can I fix a guitar string that has broken or come loose?
To fix a broken or loose guitar string, you can replace it with a new string of the same gauge and type. First, remove the broken string by unwinding it from the tuning peg and bridge. Then, insert the new string through the bridge and wind it around the tuning peg, making sure to tighten it to the correct pitch. Finally, trim any excess string length and tune the string to match the other strings on the guitar.
How can I fix an acoustic guitar string that has broken or come loose?
To fix a broken or loose acoustic guitar string, you can replace it with a new string of the same gauge. First, remove the broken string by unwinding it from the tuning peg and bridge. Then, insert the new string through the bridge and wind it around the tuning peg, making sure it is properly secured. Finally, tune the string to the correct pitch using a tuner.
How can I fix a broken necklace string?
To fix a broken necklace string, you can use a needle to rethread the beads or use jewelry glue to secure the broken ends. Alternatively, you can take it to a professional jeweler for repair.
