Carrier power is the power that comes out of a transmitter and goes to the transmitting
antenna at the moment when no information is being added to the transmission ... no
music, voice, sound, picture, data, noise, hum, no nothing. Only what they call a "bare
carrier".
There are different methods of adding information to the carrier, called "modulation".
Some of them change the instantaneous power of the transmitter, others don't.
Examples: AM rapidly varies the transmitter power. Properly adjusted FM doesn't.
Sound.More informationAfter a modulated carrier signal has been received through the radio's aerial, the radio de-modulates it to release the live sound as picked-up from microphones in the radio studio (or was taken from recordings), which was then used to modulate the carrier signal at the transmitter.De-modulation that is done by a radio receiver can be described very simply as "removing the carrier signal to produce the sound".
Frequency Modulation must have a carrier whereby the frequency can be modulated by the signal
THE FUNCTIONS ARE ; 1>in modulation process. 2>in inserting pilot carrier. ans. by arshid bhat kash....................
The carrier wave carries the information that you hear. It is modulated by the sound which varies its amplitude or frequency. Without the carrier there would be nothing to vary so you would hear nothing.
Amplitude Modulation- AM standard Broadcast band. AM is an abbreviation for amplitude modulation,a form of radio transmission in which the carrier radio wave's amplitude is varied according to the strength of the modulating signal(sense).
In radio transmission, you could theoretically transmit radio signals at audio frequencies. However, because the wavelength of electromagnetism at audio-like frequencies is Huge and the frequency of a radio transmitter dictates the size of the antenna and the power requirement, you would need A Very Big Antenna and a Very Big Power Supply to do this. So, we've learned to transmit at higher "carrier" frequencies, modulating either the amplitude or frequency of the carrier signal with our audio and subtracting the carrier at the receiver end.
Total Power = Carrier Power * 5
False.
False.
Explain the need for carrier frequency stability in radio transmitters?
Both are forms of AM but in suppressed carrier a filter is used to attenuate the carrier frequency prior to transmission. This is usually done to reduce the total transmitter power consumption. An ordinary AM radio cannot correctly receive suppressed carrier stations, you must have a receiver that replaces the carrier prior to the detector stage.
Sound.More informationAfter a modulated carrier signal has been received through the radio's aerial, the radio de-modulates it to release the live sound as picked-up from microphones in the radio studio (or was taken from recordings), which was then used to modulate the carrier signal at the transmitter.De-modulation that is done by a radio receiver can be described very simply as "removing the carrier signal to produce the sound".
generates carrier waves
yes
carrier wave
radio an amplitude-modulated wave in which only the sidebands are transmitted, the carrier being removedhttp://dictionary.reference.com/browse/suppressed+carrier+modulation
Sound.More informationAfter a modulated carrier signal has been received through the radio's aerial, the radio de-modulates it to release the live sound as picked-up from microphones in the radio studio (or was taken from recordings), which was then used to modulate the carrier signal at the transmitter.De-modulation that is done by a radio receiver can be described very simply as "removing the carrier signal to produce the sound".