0
The soundboard is made of spruce - the most resonant of all woods. The frame of the piano (the large metal apparatus that holds all the strings) is bolted to the soundboard. The soundboards purpose, as hinted at in the name, is to amplify and ritchen all the notes struck on the piano. The soundboard is easiest to see on an upright piano. It is the diagonal "strips of wood" visible on the back of the piano.
Wiki User
∙ 12y ago
Wiki User
∙ 14y agoThe soundboard is the piece of wood on an acoustic guitar that faces the audience. It has special bracing behind it, a "sound hole" in the center, and serves as the anchor for the bridge. These combined elements enhance resonance and amplify the sound -- thus sound board.
An experiment to illustrate this acoustic phenomenon: ring a tuning fork (or a drinking glass that resonates) and place it against a wall. The vibrations are transferred to the wall and it acts as a soundboard. Because the wall is not designed for amplification, the effect is minimal, but noticeable.
Wiki User
∙ 14y agoThe fingerboard
Add your answer:
Earn +20 pts
A famous guitar maker once used papier-mâché as a component of a guitar Why?
To demonstrate the importance of the top, or soundboard, to the guitar's tone
What does the nut do for the acoustic guitar?
It, along with the bridge at the other end, defines the singing length of the open string. It is the bridge that transfers the sound from the string to the soundbox/soundboard of the guitar.
Is a brass piano soundboard worth anything?
Well, it's not brass, it's iron painted yellow or gold. And it's the frame, not the soundboard - the soundboard is made of spruce. And it's worth whatever you can get for it. Put it on Ebay - you might be surprised!
What is a harpsichord soundboard?
Yes. The soundboard is usually made of wood like spruce and is installed in the case. The strings are attached to the tuning pins on one end, then go over a wooden bridge glued to the soundboard and are pinned to a wooden rail glued over the soundboard on the other end with what are called hitchpins. The sound is transferred to the soundboard by the strings vibrating against the bridge (mostly). The strings are plucked when the player presses a key which is really a lever that raises something usually called a plectrum (like a pick for a guitar) which causes the string to vibrate.
How does a guitar make a noise?
Acoustic: The string vibrates - this causes the sounding board of the guitar to vibrate at the same frequency (note). The velocity of a wave through the soundboard is higher than that of the string, so the soundboard causes sounds much louder than the strings. Electric: The string vibrates, which disrupts the magnetic field of the pickups. Whatever frequency a string vibrates at causes a different magnetic flux. An electrical current can be induced by a change in magnetic flux. This current is sent to an amp, which produces the sound.
A famous guitar maker once used papier-mâché as a component of a guitar Why?
To demonstrate the importance of the top, or soundboard, to the guitar's tone
What does the nut do for the acoustic guitar?
It, along with the bridge at the other end, defines the singing length of the open string. It is the bridge that transfers the sound from the string to the soundbox/soundboard of the guitar.
What is an archtop?
An archtop is a style of large steel-stringed guitar with an arched belly, a neck at an angle to the body and a fretboard elevated above the soundboard.
What is the middle of a guitar called?
Guitar has three main parts: guitar body, neck, and a head. Guitar head has tuning pegs which are used to tighten the strings. Guitar neck has frets which are used to shorten the string and produce different pitches. Guitar body is where the sound is produced. Guitar body has three main parts: the top (soundboard), back, and sides. The top has additional different parts: sound hole (a cutout in the body through which the sound comes out), rosette (does not have any sound-producing purpose, but ornaments the sound hole), bridge (holds the strings on the lower side), and saddle (transfers the vibrations from the strings to the soundboard).
Is an acoustics guitar the same as an electric guitar?
No, an acoustic guitar is one not dependent on an external device to be heard but uses a soundboard which is a wooden piece mounted on the front of the guitar's body, while electric guitars can have solid, semi-hollow, or hollow bodies, and produce little sound without amplification
When was The Soundboard Series created?
The Soundboard Series was created in 2001.
How do you create your own soundboard?
if you want to make a soundboard download it at @www.soundboard.com/onlinemaker
How much to pay a soundboard man at the funeral?
I was paid $50 at the last funeral I ran the soundboard,
How can sound waves with different frequencies be produced by the same guitar string?
In all types of guitars the sound is produced by the vibration of the strings. However, because the strings can only displace a small amount of air, the volume of the sound needs to be increased in order to be heard. In an acoustic guitar, this is accomplished by using a soundboard and a resonant cavity, the sound box. The body of the guitar is hollow. The vibrating strings drive the soundboard through the bridge, making it vibrate. The soundboard has a larger surface area and thus displaces a larger volume of air, producing a much louder sound than the strings alone. As the soundboard vibrates, sound waves are produced from both the front and back faces. The sound box provides both a support for the sound board and a resonant cavity and reflector for the sound waves produced on the back face of the soundboard. The air in this cavity resonates with the vibrational modes of the string (see Helmholtz resonance), increasing the volume of the sound again. The back of the guitar will also vibrate to a lesser extent, driven by the air in the cavity. Some sound is ultimately projected through the sound hole (some variants of the acoustic guitar omit this hole, or have f holes, like a violin family instrument). This sound mixes with the sound produced by the front face of the soundboard. The resultant sound is a complex mixture ofharmonics that give the guitar its distinctive sound.
Is a brass piano soundboard worth anything?
Well, it's not brass, it's iron painted yellow or gold. And it's the frame, not the soundboard - the soundboard is made of spruce. And it's worth whatever you can get for it. Put it on Ebay - you might be surprised!
What is a harpsichord soundboard?
Yes. The soundboard is usually made of wood like spruce and is installed in the case. The strings are attached to the tuning pins on one end, then go over a wooden bridge glued to the soundboard and are pinned to a wooden rail glued over the soundboard on the other end with what are called hitchpins. The sound is transferred to the soundboard by the strings vibrating against the bridge (mostly). The strings are plucked when the player presses a key which is really a lever that raises something usually called a plectrum (like a pick for a guitar) which causes the string to vibrate.
How does a guitar make a noise?
Acoustic: The string vibrates - this causes the sounding board of the guitar to vibrate at the same frequency (note). The velocity of a wave through the soundboard is higher than that of the string, so the soundboard causes sounds much louder than the strings. Electric: The string vibrates, which disrupts the magnetic field of the pickups. Whatever frequency a string vibrates at causes a different magnetic flux. An electrical current can be induced by a change in magnetic flux. This current is sent to an amp, which produces the sound.
