its to see if the harmonic notes match up with the guitar when its in tune. This is crucial if you play stuff like Zakk Wylde or Dimebag, if you don't ever use harmonic notes this is a waste of time or money to get done properly, lots of videos on YouTube to figure out how to do it as well, this isn't too hard.
The 'scale' of a guitar refers to the average string length between the bridge and the nut of the guitar (this is the average length because intonation at the bridge means that not all the strings are identical in length from nut to bridge).
No. It doesn't NEED intonation when you change the strings, and most people don't intonate their guitars when they put a new set of strings on, but your guitar will be slightly more in tune if you do chose to intonate it. Also, if the new strings you use are a different gauge, it would be a good idea to intonate your guitar, because there's a different amount of tension on the neck and bridge.
there are two kind of intonTION rissing and falling intonation
The intonation of the guitar must be set by moving the bridge/saddles forward or backward in accordance with the harmonics/root note. For instance after you have tuned your guitar to standard tuning using a chromatic tuner, fret your guitar on the 12 fret and then pick the note then pick the 12 fret natural harmonic, you can tell with a digital tuner if the note is sharp or flat. When picking between the string and harmonic when the intonation is set correctly the natural harmonic will be on key as well as the fretted note. For beginners it will be fairly easy to do with a stop-bar type tuneomatic bridge. Adjust the saddle screws forward if flat and back if sharp, minute adjustments will do. Floyd Rose style bridges will become more complex if you do not know how to setup and intonate them.
When you say "it has been tuned", you make it sound like it has been tuned only once. You realize that a guitars go out of tune all the time and have to be retuned, right? If the guitar still sounds out of tune even after proper tuning, then there are a couple things which could be wrong. It could just be a lousy guitar that doesn't have the frets in the right place. In particular, sometimes you run into a guitar where the nut isn't in the right place relative to the frets, so that the open strings aren't in tune relative to the fretted strings. The other potential problem might be your bridge: the intonation might be off. If this is an electric guitar, you probably have individually adjustable saddles to adjust the intonation on every string, so this is a relatively easy problem to fix. You check the intonation by playing a note on the string, and then playing the same note one octave higher, and making sure it sounds like a true octavie. For instance, play each string open (unfingered), and then at the 12th fret (should be marked with a double-dot). The 12th fret note should sound exactly one octave higher than the open string. If it doesn't, you've got an intonation problem and your bridge needs to be adjusted. If it's an electric with an adjustable bridge, then you'll see that the bridge is made of six separate saddles (one for each string), with a screw at the end that can move each saddle forward or backward. Turn the screw to move the saddle forward or backward until the octave is true. If you have an accoustic with an intonation problem, I'm not sure what can be done. Take it back to where you bought it.
The 'scale' of a guitar refers to the average string length between the bridge and the nut of the guitar (this is the average length because intonation at the bridge means that not all the strings are identical in length from nut to bridge).
The four intonation patterns are falling intonation, rising intonation and fall-rise intonation.
The answer is rising intonation and falling intonation
No. It doesn't NEED intonation when you change the strings, and most people don't intonate their guitars when they put a new set of strings on, but your guitar will be slightly more in tune if you do chose to intonate it. Also, if the new strings you use are a different gauge, it would be a good idea to intonate your guitar, because there's a different amount of tension on the neck and bridge.
How do you get to Carnegie Hall? Intonation, intonation, intonation.
The answer is rising intonation and falling intonation
Monotone is an antonym for intonation.
there are two kind of intonTION rissing and falling intonation
Rising intonation is used before the climax and falling intonation is used after the climax. Rising intonation Did you turn it on? Falling intonation How was your day?
The 3 basic types of intonation patterns are JUST INTONATION, EQUAL TEMPERMENT, and PYTHAGOREON INTONATION... :))
Someone who maintains guitars, ie, fixes intonation, changes the action, restrings them, etc. as opposed to a luthier who is someone who makes guitars.
suspended intonation