answersLogoWhite

0

Violin 1 and 2 are roughly equal sized sections of the orchestra, each made up of (usually) 12-16 violinists. The concertmaster (lead violinist) sits at the front of the first violins). The 1st violin section usually carries the melody, whereas the 2nd violins usually accompany. This is however not always the case. Sometimes the 2nd violins play the 1st violin part but one octave below. The relationship between the two sections varies from composer to composer. For example in Johann Strauss, the 2nd violins usually provide the waltz rhythm, and the 1st violins carry the melody. However in Elgar (for example), they are often on equal terms and a lot of role reversal occurs where the 2nds have the tune and 1sts accompany.

A good concluding remark would be that there is no less a difference between the two sections than there is between strings and woodwind for example, except that they employ the same instrument.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

What is the difference in size between a viola and a violin?

The viola is slightly larger than the violin, with the viola being around 2-3 inches longer than the violin.


What is the difference between 9/16 and 1/2?

The difference between 9/16 and 1/2 is 1/16.


What are the differences in size between a viola and a violin?

The viola is larger than the violin, with the viola typically being around 2-3 inches longer in body length compared to the violin. This difference in size also affects the sound and range of the instruments.


What is the difference between the numbers 2 and 3?

1. The difference of two numbers are the numbers between them. The difference is found by subtracting the smaller number from the larger. In this case, 2 is subtracted from 3 (3-2) with a difference of 1. 3-2=1


What is Violin 2?

Violin 2 means that there is an orchestra in the music being played, but different notes. There are Violin 1, Violin and Violin 3, but played in different times, notes, depending on the music sheet they have.


What is the difference between -2 1 over 2 and -5 3 over 4?

The difference is 3 1/4.


What is the difference between 9/16 inch and 1/2 inch in terms of measurement?

The difference between 9/16 inch and 1/2 inch is 1/16 inch.


What is the difference between 5 and 3 eighths and 2 and 1 half?

The difference is 2 and 7 eighths.


What is the distance between -2 5 and -1 1?

The difference between -25 and -11 is 14.


What is the difference between 4 times as many as 8 and 1 fourth as many as 8?

4x8=32 1/4x8=2 The difference between 32 and 2 is 30.


what difference between perpendicular/base and 1/2 * base *height?

2


What is the difference between 2-d shapes and 1-d shapes?

1