Iridium satellites operate in the L-band frequency range, specifically between 1616 MHz and 1626.5 MHz for their communication systems. This frequency range is used for both voice and data transmissions, enabling global coverage. The satellites utilize a unique polar orbit to provide connectivity across the entire Earth, including remote areas.
Radio frequency (RF) is a rate of oscillation in the range of about 30 kHz to 300 GHz
freq range of rf is 3hz (extremely low frequency) to 300Ghz (extremely high frequency)
Radio waves have a frequency range that typically spans from about 3 kHz (kilohertz) to 300 GHz (gigahertz). The minimum frequency of 3 kHz corresponds to the very low frequency (VLF) range, while the maximum frequency of 300 GHz falls within the extremely high frequency (EHF) range. This broad spectrum allows radio waves to be utilized for various communication technologies, including AM and FM radio, television, and wireless networks.
Fm radio waves travel at various frequencies between 87.5 MHz and 108.0 MHz
Frequency modulation is used to broadcast radio waves to receivers. The most common use of it is in FM radio, which contains a range of radio frequencies.
I never heard of a "satellite wave". If you mean the radio waves used by satellites for communication - well, like all radio waves used for such purposes, there is probably a large range of waves they can use.
System Specifications: 1. Tx Frequency; 1626.5-1646.5MHz 2. EIRPG33/25dBW 3. Rx Frequency; 1525.0-1545.0MHz 4. Channel Spacing; 20kHz
Electromagnetic Frequency (EMF) & Radio Frequency (RF)
The frequency range that the radio waves can penetrate the human body is between 1Hz and 10 KHz. This frequency of the radio waves is however not dangerous.
the frequency range of radio waves is ranging from 3kHz-300GHz
Radio frequency (RF) is a rate of oscillation in the range of about 30 kHz to 300 GHz
The downlink frequency to Earth, in the context of communication satellites or spacecraft, refers to the frequency at which data is transmitted from the satellite to Earth. The specific frequency used can vary depending on the satellite system and the communication protocol being employed. Generally, downlink frequencies for satellite communication are in the microwave frequency range, typically between 1 to 50 GHz. The choice of downlink frequency is influenced by factors such as transmission range, atmospheric absorption, and regulatory requirements.
30.000 to 87.975 MHZ
freq range of rf is 3hz (extremely low frequency) to 300Ghz (extremely high frequency)
Calling an iridium satellite phone depends upon which country one is calling from. If one is calling from the United States, he/she must dial the prefixes 011--8816 followed by the eight digit phone number. However, if one is calling from a country such as Germany or Mexico, he/she would instead use the prefixes 00-8816. Australia, for instance, uses the prefixes 0011-8816 to dial an iridium satellite phone.
satellite
Radio waves have a frequency range that typically spans from about 3 kHz (kilohertz) to 300 GHz (gigahertz). The minimum frequency of 3 kHz corresponds to the very low frequency (VLF) range, while the maximum frequency of 300 GHz falls within the extremely high frequency (EHF) range. This broad spectrum allows radio waves to be utilized for various communication technologies, including AM and FM radio, television, and wireless networks.