0
What else can I help you with?
What piano did Freddie mercury use on the 'night at the opera' album?
Wooden
How do you make a piano?
Lumber- a lot for a big piano less for a smaller one.220 piano strings or good quality twinePressure barsTuning barsHitch pins orScrews and wing nuts.Felt or an old coatCast Iron PlateToolsThe sawn lumber should be be slowly seasoned and dried in a a climate controlled kiln. If you are building a very small piano your oven will probably do just fine.Choose the less good looking wood and glue planks together to build a soundboard. Leave them to dry and season. Before the soundboard can "speak" the wood fibers must be stretched: do this by bending the soundboard and glue a series of ribs to the backside. Then mount the soundboard to a wood backframe.Sound is sent to the soundboard by the vibrating strings through bridges, over which the strings are stretched.You will have to notch the the bridges first. The front of the finished soundboard will have a pinblock where you will mount the tuning pins. As well as treble and bass bridges, but skip this step if you're running out of time.Mount a cast iron plate to the soundboard/backframe assembly. (You will need to put a hole for each tuning pin in the cast iron ---you may need need help with that) as well as pressure bars and hitchpins, these will guide and anchor the strings.After the plate is mounted drill holes into the pinblock guided by the holes in place or close enough.Now you move on to stringing--- this is usually done by a skilled stringer, so if you have one around by all means use him/her. If not just wing it.Choose the correct string thickness for each pin. Every string end is wound around the top of the tuning pin exactly two and one-half turns or whatever you have time for.When it is completely strung, grab a coffee or a Fresca and let it sit awhile to stabilize.Now just build the outside of the piano. Traditional shapes work best, but an unusually shaped piano is much more interesting.Now you have to produce the keys and hammers Take a block of felt ( or an old coat) and trim the pieces to the desired hammer shape then slice into individual hammerfelts.Wrap and glue the finished hammers to a wooden hammer core. Then you mount them on a small wooden dowel.Everything is then mounted on each of the 88 actions sections, one for each key. If you are building a tiny piano, then use 44 -22 keys.You then saw the piano keys into 88 (or 44-22) from one slab of wood. Carefully glue and trim the black and white keytops to the desired dimensions before installing.Check out you height, spacing and alignment then install the keys and hammers, now you will begin "action regulation" which is a series of fine adjustments, but if you're running late it is not completely necessary.
Why is a piano better than a keyboard?
yes because you can use piano to play music
How do you hear a piano?
You use your ears
Does Adele use piano in her music?
yes
What piano did Freddie mercury use on the 'night at the opera' album?
Wooden
What is spruce used for?
The only use I'm aware of for spruce is that it is used in pianos as the soundboard. Spruce was found to be the best material for piano soundboards especially when it is grown in cold climates.
How can I record an upright piano effectively?
To record an upright piano effectively, place a high-quality microphone near the soundboard or inside the piano, adjust the microphone position for the best sound, and use a recording device or software to capture the audio. Experiment with different microphone placements and settings to achieve the desired sound quality.
Who uses graphite?
The Piano manufacturing process of wooden parts used to use graphite as a lubricant to reduce friction.
How can I ensure the best quality when recording an upright piano?
To ensure the best quality when recording an upright piano, position the microphone close to the soundboard for a rich tone, use high-quality microphones and cables, minimize background noise, and experiment with microphone placement to find the best sound.
How do you make a piano?
Lumber- a lot for a big piano less for a smaller one.220 piano strings or good quality twinePressure barsTuning barsHitch pins orScrews and wing nuts.Felt or an old coatCast Iron PlateToolsThe sawn lumber should be be slowly seasoned and dried in a a climate controlled kiln. If you are building a very small piano your oven will probably do just fine.Choose the less good looking wood and glue planks together to build a soundboard. Leave them to dry and season. Before the soundboard can "speak" the wood fibers must be stretched: do this by bending the soundboard and glue a series of ribs to the backside. Then mount the soundboard to a wood backframe.Sound is sent to the soundboard by the vibrating strings through bridges, over which the strings are stretched.You will have to notch the the bridges first. The front of the finished soundboard will have a pinblock where you will mount the tuning pins. As well as treble and bass bridges, but skip this step if you're running out of time.Mount a cast iron plate to the soundboard/backframe assembly. (You will need to put a hole for each tuning pin in the cast iron ---you may need need help with that) as well as pressure bars and hitchpins, these will guide and anchor the strings.After the plate is mounted drill holes into the pinblock guided by the holes in place or close enough.Now you move on to stringing--- this is usually done by a skilled stringer, so if you have one around by all means use him/her. If not just wing it.Choose the correct string thickness for each pin. Every string end is wound around the top of the tuning pin exactly two and one-half turns or whatever you have time for.When it is completely strung, grab a coffee or a Fresca and let it sit awhile to stabilize.Now just build the outside of the piano. Traditional shapes work best, but an unusually shaped piano is much more interesting.Now you have to produce the keys and hammers Take a block of felt ( or an old coat) and trim the pieces to the desired hammer shape then slice into individual hammerfelts.Wrap and glue the finished hammers to a wooden hammer core. Then you mount them on a small wooden dowel.Everything is then mounted on each of the 88 actions sections, one for each key. If you are building a tiny piano, then use 44 -22 keys.You then saw the piano keys into 88 (or 44-22) from one slab of wood. Carefully glue and trim the black and white keytops to the desired dimensions before installing.Check out you height, spacing and alignment then install the keys and hammers, now you will begin "action regulation" which is a series of fine adjustments, but if you're running late it is not completely necessary.
Where is a webside that you can use microsoft sam with no downloads?
The website that allows you to use Microsoft Sam with no downloads is Soundboard.
How can I effectively mic a piano to achieve the best sound quality?
To effectively mic a piano for the best sound quality, place one microphone above the strings and another below the soundboard. Experiment with microphone placement and distance to find the optimal balance between the piano's treble and bass tones. Use high-quality microphones and ensure they are properly connected to a mixer or recording device for the best results.
How do you use the piano?
we use the piano by your fingers and the pinkie
How do you use a piano?
you use your fingers :)
How do you use the word wooden in a sentence?
there was a wooden chest at bottom of the bed
How do yu use the piano in fl studio?
If you mean use the "Piano Roll" instead of the sequencer, simply right-click the track or instrument and select "Piano Roll". If you mean how to use a piano, add or replace a track with any module (generator) that has a piano preset, specifically FL Keys, which is a piano specific module.
