That is the O2 sensor in the exhaust closest to the engine.
It is the sensor in the exhaust closest to the front and top.
It is the sensor in the exhaust closest to the front and top.
It is the sensor in the exhaust closest to the front and top.
It is located on the passenger side of the motor after the catalytic converter. The cat is at the end of the exhaust manifold, so the connector is accessible at the motor, the sensor is accessible from underneath the car.
It's an oxygen sensor malfunction. Believe it's bank 2 (right side), upstream. May need clarification on exactly which one of the four.
bank 1 is always driver side On the 4.0 there is only one bank, and the o2 sensors always are counted as #1 closest to the engine, #2 next closest and as follows
Trouble code P1762 means: Governor pressure sensor offset improper voltage
Your in luck...that should be the oxygen sensor in the exhaust manifold at the front of the engine compartment. Bank 2 is the bank of cylinders that does NOT contain the #1 cylinder. That bank is bank 1. Sensor 1 is the oxygen sensor upstream of the catalytic converter, and sensor 2 is the one after the cat.
bank 1 is the #1 cylinder side, possibly the driver side sensor 2 is after the cat converter
It is located on the passenger side of the motor after the catalytic converter. The cat is at the end of the exhaust manifold, so the connector is accessible at the motor, the sensor is accessible from underneath the car.
On the left bank of the motor, 2nd sensor to the rear.
The bank one sensor, on your Suzuki Grand Vitara XL7 4 x 4 is located on the front of the transmission. The sensor will have 3 wires coming from it.
Trouble code P0161 means:O2 sensor heater circuit malfunction (Bank 2 Sensor 2)
for a 97-03 grand prix there is a front and rear o2 sensor. bank 1 sensor 2 is the sensor located on the exhaust near the catalytic converter (cat) also known as the REAR sensor... bank 1 sensor 1 is located on the back of the engine on top of the exhaust manifold or headers would be the street term. thats the FRONT sensor.
Trouble code P0155 means:O2 sensor heater circuit malfunction (Bank 2 Sensor 1)
It is the sensor in the outlet of the catalytic converter.
It is the sensor that is screwed into the exhaust manifold on the back of the engine.
Faulty sensor or lean mixture, that could be caused by vacuum leak or dirty injectors in bank 1
Is this bank 2 sensor 1 or sensor 2?
P0135 O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1) Bank one is drivers side. Sensor 1 is the one closest to the engine.