?The lighting circuits go through the Lamp Outage Module (LOM) I think. Replacing all the bulbs and insuring they are the correct bulbs would be a good first step. If the problem still occurs, then I would have to suspect a bad LOM.?
?If you need to, you can use a wiring diagram to check out the wiring for a possible short.
its not a switch its a fuse check the fuse and the light fuse is under the driver side dash look in your manual for brake light fuse
It is just above the brake pedal under the dash.
How to change the brake switch on a 2004 Jeep grand Cherokee Laredo
The 2004 Jeep Grand-Cherokee has 12 valves.
There is no such sensor, the oil change reminder only runs off of mileage on a 2004
The curb weight of the 2004 Jeep Grand-Cherokee is 3790 lbs..
The 2004 Jeep Grand-Cherokee has a drag coefficient of .45 Cd.
How to change the brake switch on a 2004 Jeep grand Cherokee Laredo
In the brake rotors.
A seat from a 1999-2004 Grand Cherokee is what fits in a 1999-2004 Grand Cherokee.
Check socket for power/ground corrosion Check stop light switch for power on one side Check fuse
The 2004 Jeep Grand-Cherokee has 12 valves.
7MM
The 2004 Jeep Grand-Cherokee has overhead valves (OHV).
The 2004 Jeep Grand-Cherokee is a gas-powered vehicle.
The 2004 Jeep Grand-Cherokee has a 4-speed automatic.
The 2004 Jeep Grand-Cherokee has an inline 6 engine.
Problem with the brake switch, below the pedal. The mounting may have got bent keeping them on.
There is no such sensor, the oil change reminder only runs off of mileage on a 2004