auto trans it is mounted drivers side (left) bolted to trans where shift cable is mounted follow the shaft going into trans and switch is bolted to trans with shaft through middle of it most time switch is not bad it is just out of adjustment from worn linkage connections .loosen bolts on switch and rotate switch until it starts in park switch is adjustable make sure you chock wheels front and rear with e-brake on for your safety
your torque converter solenoid is located in the valve body of the transmission.
you have to drop the pan on the tranny but you really better know what your doing or you can do alot of damage
The solenoid is inside the transmission, on the valve body. The circuit would include the computer, solenoid and wires in between.
There is no relay. The solenoid is inside the transmission on the valve body.
ac clutch relay open or short circuit
There is no fuses for the air conditioning clutch, but there is a relay mounted on the passenger fender beside the fuel pump relay.
It's on top of the transmission. Follow the tube coming from the master cylinder.
The neutral safety switch on any standard transmission is located behind the clutch pedal arm, and activated when the clutch pedal is fully depressed. the neutral safety switch is located behind the clutch pedal arm in any standard tranny car that has one, it is activated by fully depressing the clutch.
not charged properly,over-charged, severe restriction in system (should have showed up on gages if properly charged), bad recycle switch, good luck, Mike
Are you looking for the Torque Converter Clutch Solenoid? If so, it is inside the side pan behind the driver side wheel on the three speed auto transmissions anyway.
Trouble code P0744 means:Torque converter clutch circuit intermittent
It is inside the torque converter.
P0740 = Torque Converter Clutch Circuit Malfunction
Torque Converter Clutch Circuit Stuck On
The torque converter clutch is inside the torque converter.The torque converter clutch is inside the torque converter.
Torque converter clutch malfunction.
Trouble code P0742 means:Torque converter clutch circuit stuck on
The engine computer.
Trouble code P0740 means:Torque converter clutch circuit malfunction
Trouble code P0740 means:Torque converter clutch circuit malfunction
Trouble code P0740 means:Torque converter clutch circuit malfunction