Starting with the thickest string, it goes E, A, D, G, B, E.
That depends on the guitar! On a Tenor guitar there are four strings, on a standard guitar there are six strings, and there are twelve strings on a twelve string guitar.
Normally a 12 string is just 6 pairs of strings. The guitar can be tuned normally EADGBE (low to high) and the smaller strings of the pairs tuned an octave higher than their mate. Except the high E string which is in unison because the high "E"s are the same gauge string. Then it should play like a 6 string guitar.
depending on the the individual gauges of the six (6) guitar strings ie: E, A, D, G, B, E, of course the guitar string that is long and loose produces the lowest pitch... A good example of this are the strings on a mandolin or a 'banduria' which has shorter strings compared to the strings on the guitar...because the mandolin/banduria strings are shorter and tighter, it produces higher pitch... "short and tight=higher pitch......long and loose=lower pitch"
Most classical guitar strings are made from a sort of nylon material. Some expensive types of 6 or 12 string guitars used for Mexican music use steel strings.
six
That depends on the guitar! On a Tenor guitar there are four strings, on a standard guitar there are six strings, and there are twelve strings on a twelve string guitar.
A twelve-string guitar has 12 strings on it, hence the name "twelve-string" guitar. Hope it helps,- Roxas Riku
on a normal guitar the second string but on a 7 string it has two.. just like the 6 strings its the second but it also has a low B for the top string.
No, it is not recommended to put nylon strings on a steel string guitar as the tension and construction of the guitar may not be suitable for nylon strings.
it has 6 or 12
Playing a 12-string guitar can be more challenging than playing a 6-string guitar due to the increased number of strings and the need for more finger strength and dexterity to fret and strum accurately.
The guitar string key is important for adjusting the tension of the guitar strings, which helps to keep the strings in tune. Turning the key tightens or loosens the strings, allowing the player to tune the guitar accurately.
Normally a 12 string is just 6 pairs of strings. The guitar can be tuned normally EADGBE (low to high) and the smaller strings of the pairs tuned an octave higher than their mate. Except the high E string which is in unison because the high "E"s are the same gauge string. Then it should play like a 6 string guitar.
depending on the the individual gauges of the six (6) guitar strings ie: E, A, D, G, B, E, of course the guitar string that is long and loose produces the lowest pitch... A good example of this are the strings on a mandolin or a 'banduria' which has shorter strings compared to the strings on the guitar...because the mandolin/banduria strings are shorter and tighter, it produces higher pitch... "short and tight=higher pitch......long and loose=lower pitch"
Most classical guitar strings are made from a sort of nylon material. Some expensive types of 6 or 12 string guitars used for Mexican music use steel strings.
The main differences between a 6-string bass and a guitar are the number of strings and the tuning. A 6-string bass typically has thicker strings and is tuned lower than a guitar, allowing for deeper and more resonant tones. Additionally, the scale length and neck width of a 6-string bass are usually longer and wider than those of a guitar, providing a different playing experience and sound.
Every normal modern (steel, acoustic, electric) guitar has got 6 strings. Though the first guitars, hundreds of years ago, had 4 strings. Nowadays there are also 7,8,9,10 and 12 string guitars. But the 'normal' guitar has got 6 strings.