sasi
To clean the drum of a Brother 1430 printer, first, turn off the printer and unplug it for safety. Remove the drum unit by pressing the release lever and pulling it out gently. Use a soft, lint-free cloth to wipe the drum surface carefully, avoiding contact with the photoconductive surface to prevent damage. After cleaning, reinsert the drum unit, ensuring it's securely in place before plugging the printer back in and turning it on.
Its origins lie between the Caribbean Steel Drum and the Swiss Hang drum but the Hapi was invented in the USA and is a recent invention.
100000b.c
trinidad
The Spanish.
Evidently you have a page printing Laser Printer rather than an Inkjet or matrix style. That technology uses a drum. This is similar in concept to a copier, and contains a Drum. It may be an integral part of the toner cartridge.
the steel drum was invented in trinidad.the steel drum was invented in trinidad.
Make sure the printer is turned on and the drum LED is blinking. Open the front cover. Slowly pull the drum unit and toner cartridge assembly out of the machine. Push down the green lock and take the cartridge out of the drum unit.
yes it can
the laser printer was invented in 1969 dumbasses
The person that invented the printer is Gary Starkweather.
the person who invented bissyomble printer is rachoel zimmerman
Remove the drum, leave the front door open on the machine, press the options button, and you will be prompted with "New Drum?" and then press yes and "Accepted" will appear. Close the drum door.
Chuck Norris invented the quint drum. Chuck Norris also invented the drum corps even before bugles were invented
A drum reset chip for a Dell 3100 CN printer is a small electronic component that tracks the usage of the imaging drum. When the drum reaches its life expectancy, the chip signals the printer to stop printing and indicates that the drum needs to be replaced. By resetting the chip, either through a physical reset or a compatible replacement, the printer can continue to operate, allowing users to extend the life of the drum. However, resetting the chip may not address any actual wear or performance degradation of the drum itself.
Okidata invented the multifunction printer with their okioffice model.
The type of printer that uses a rotating photosensitive print drum is the laser printer. In this technology, a laser beam selectively charges the drum to create an image, which is then transferred onto paper using toner. The drum rotates to facilitate the printing process, allowing for high-speed and high-quality prints.