Want this question answered?
Creep is a phenomenon of a sample to deform against time at particular temperature. Creep is the tendency of a solid material to slowly move or deform permanently under the influence of stresses. It occurs as a result of long term exposure to levels of stress that are below the yield strength or ultimate strength of the material. Creep is more severe in materials that are subjected to heat for long periods, and near the melting point
he's living at your house under your bed and he wants to be your friend.
Under the right circumstances and conditions, YES.
Phillip Glass's Company: II
no they have families and so they have to live under different roofs
creep is term used for failure of materials under constant load at elevated temperatures. Eg: lathe bed.
House Hunters International - 2006 Permanent Summer Down Under in Sydney Australia 34-1 was released on: USA: 14 March 2012
Necking, or deformation under tension, contributes to tertiary creep in that necking exponentially increases the stress on the solid material.
incline
yes he/she should get a job to earn extra money and be more responsible and be out of the house for the summer .
Under Summer Sun was created in 2008.
It can be caused by GRAVITY as in the case of old lead pipe sagging. In addition copper contact wires in electrified transport systems sagging under permanent stress causes creep.
It can be caused by GRAVITY as in the case of old lead pipe sagging. In addition copper contact wires in electrified transport systems sagging under permanent stress causes creep.
Concrete creep is defined as: deformation of structure under sustained load. Basically, long term pressure or stress on concrete can make it change shape. This deformation usually occurs in the direction the force is being applied. Like a concrete column getting more compressed, or a beam bending. Creep does not necessarily cause concrete to fail or break apart. Creep is factored in when concrete structures are designed.
Yes; this phenomenon is called creep and is accelerated at high temperatures and/or under stress.
Creep usually occurs as a result of thermal and physical stress overcoming the elasticity of the metal preventing it from returning to its original shape after the stress is removed.
You can't get under bill's house.