Each radio has its own specifc code, if you did not pull the radio and get the code for the serial number on the exsisting radio it is possible that the original radio may have been replaced before and the code you have is for the original radio. You will have to go to a dealer to get the new number with proof of ownership.
If you take your car to Nissan car dealership and request for your radio code with the right identification, your wish will be granted.
When the radio displays "code" enter the five digit anti theft code and press the "SC" button. If you need the code it can be obtained by contacting your local MB dealer and providing your VIN number.
if your vehicle was serviced by a dealer and they had to re-enter the code, Most dealers would put the code in the trunk area. Some in the spare tire and some on the trunk hood. You will have to look. It will be a 4 digit number with either a 1 or 0 as the first digit.
There is a piece of sticker in the glove compartment with some number. That's the one you need to enter on the radio button. one question, did you take out the battery cable? Because every time you do, you need to enter that password for the radio system and the anti-theft system to work... My brother got a 1999 Honda accord, hope this help you.
anti theft system is bad
No, the factory radio is not an anti theft radio.
Power the radio, and then enter the anti-theft code using the preset numbers at the bottom of the radio. If the anti-theft code is unknown, contact Honda with the 17-digit vehicle identification number.
What about it? Do you have a question?
Unhook battery cables to reset and then when you turn radio on again just type the code using the numbers 1-6
The Anti-Theft code that is associated with the "Theft Deterrent System" is a 5-digit code located on the underside of the ashtray.
If you take your car to Nissan car dealership and request for your radio code with the right identification, your wish will be granted.
Provided that you have the anti theft code on hand, leave the radio on for one hour after exactly one hour you will hear a beep and the radio display screen will no longer read "error e" it will display "code" and that is when you enter the five digit anti theft code using the preset bottons.
Radio
Insert the code that is located toward the back in the owners manual, or if you don't have the dealer can provide you with the radio code using the vehicle vin. The code is inserted using the number in the radio, it's a four digit number.
What are you talking about. The code for that anti-theft vehicile alarm, or the anti-theft radio? Either way - you should be able to go to your local dealer for the information.
YES easy way to check if you have stock radio should have anti theft light. It is linked into the IGN.
To find the anti theft code for a 2000 Mitsubishi Galant, you must visit a dealer. You must have the radio serial number, the radio part number, and the VIN.