answersLogoWhite

0


Best Answer

Tuning Forks should be struck gently and put over sonometer boxes gently due to the fragile nature of the tuning fork and the sonometer box. The tuning fork is a metal rod with two prongs that vibrate at a specific frequency when struck. This vibration can be damaged or distorted if the tuning fork is struck too hard. Similarly, the sonometer box is a box filled with metal strings or wires, and if the tuning fork is placed too hard or too quickly, the metal strings can be damaged or distorted.

Gently striking and placing the tuning fork over the sonometer box is also important for accurate results. If the tuning fork is struck too hard, the frequency of the resulting vibration will be higher than desired, and if the tuning fork is placed too hard or too quickly onto the sonometer box, the vibrations will be distorted and the resulting frequency will not be accurate.

In conclusion, tuning forks should be struck and placed over sonometer boxes gently in order to protect the fragile nature of both the tuning fork and the sonometer box, as well as to ensure accurate results.

User Avatar

David Denton

Lvl 10
1y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why should tuning fork be struck gently and put over sonometer box gently?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you determine the frequency of a tuning fork using sonometer and what are the readings of a tabular column?

Idont know


What is purpose of using sonometer?

A sonometer is used to measure the frequency of sound waves produced by a vibrating tuning fork or other sound source. It helps in studying the properties of sound and resonance. It is commonly used in physics labs and educational settings to demonstrate concepts related to waveforms and frequencies.


01 What is the principle involved in Sonometer experiment?

The principle involved in a Sonometer experiment is to demonstrate the relationship between the frequency of a sound wave produced by a vibrating string and the tension, length, and mass per unit length of the string. It is based on the concept of resonance, where the string vibrates at its natural frequency when a tuning fork is held close to it, producing a loud sound.


Why there are two holes in sonometer box?

The two holes in a sonometer box are used for passing the string or wire that holds the vibrating tuning fork or a weight. This allows the string to vibrate freely and produce a clear sound, which is crucial for accurate measurements in experiments involving sound waves.


How waves are created and propagate when a tuning fork is struck?

Because of the tuning fork's vibrations. It creates compressional sound waves.


What are free vibrations?

A tuning fork struck result in free vibrations.


Two tuning forks are struck at the same timeone tuning fork has a frequency of 20 hz while the second tuning fork has a frequency of 226 hz how many beats will result?

11.3 beats


What two-pronged metal instrument sounds a tone when struck?

A tuning fork


What is a tuning fork and how is it used?

tuning fork steel instrument in the shape of a U with a short handle. When struck it produces an almost pure tone, retaining its pitch over a long period of time; thus it is a valuable aid in tuning musical instruments.


What was produced when the tuning fork struck the edge of the table?

the energy of the lighting from the sun....


Why will a struck fork sound louder when it is held against a table?

it amplifies them because the table vibrates as well as the tuning fork


What are some good advises in order to do some Oracle SQL tuning?

To get information on Oracle SQL tuning, one should speak to an Oracle representative. Alternatively, one should speak to a computer or technology specialist.