I don't know, I also have a 2004 Saturn Vue and want to put a 2006 or newer radio in it, just for the aux imput for my mp3 player.
I think it means you can buy a satellite radio receiver, and your stereo will accept it's input without modification.
You are supposed to strip the wire.
Each radio has it's own code, and no 2 are the same. You will have to cantact your Saturn dealer.
If you turn up your interior dashboard light settings, then the radio display will be brighter too. The radio dims to the setting for the dashboard when the lights are turned on.
the dashboard compartment pulls out of the dashboard there is no bolts holding this in. Then there are two bolts that hold the radio at the top. the rest is probably self explanitory as the other parts and bolts come out the same way.
Not without modification
No, not without serious hands on modification (cutting and modification to the facia panel). The actual slot is about 1.8 DIN.
1999 saturn sc1 , need radio code. 4 digit from radio is 1407
I think it means you can buy a satellite radio receiver, and your stereo will accept it's input without modification.
You are supposed to strip the wire.
A dashboard in a vehicle houses the radio components for the vehicle along with the heating/ cooling instruments.
A "Dashboard Drummer" is someone who keeps beat to a song playing on the radio/Ipod, etc, by using the dashboard, like a drumset. Hense the term "Dashboard drummer?
To remove the radio in a 1995 Toyota Corolla, first pry the radio frame from the dashboard using a flat tool like a screwdriver. Then, press in on the pins at each side of the radio and slide it out of the dashboard. Remove the wires from the back of the radio.
Each radio has it's own code, and no 2 are the same. You will have to cantact your Saturn dealer.
If you turn up your interior dashboard light settings, then the radio display will be brighter too. The radio dims to the setting for the dashboard when the lights are turned on.
radios
yes it will fit, but not without modification to the dash bezel, and a little fiberglassing to bring it back to a factory look.