1987 and up will be interchangeable, although there might be some reflashing of the ECM required.
1985-1996 Jeep Cherokee XJ should interchange 1997-2001 Jeep Cherokee XJ should interchange
If it is infinity gold edition only the ZJ models will work. (93-97) it its completely stock then it should work with other years/models. I am not completely positive..... i would like to let you know that, but i personally have a jeep with the infinity gold which i know is hard to work with.... and i have a good guess that with other years of cars it can be compatible.
It depends on the transfer case model number. A 245/247 Quadra drive takes a special fluid from the dealer. All other models take ATF
93-95 are interchangable (they are OBD-I) 96-98 OBD-II starts 99-01 02-04 05-current (AFAIK) Some parts are interchangeable between 96-01 since most is practically switched over other than the body style and suspension components and emissions controls. Drivetrain components other than transmissions (with some work they can) between the 93-98 years. Same goes for the 99-04 years.
Yes, after the introduction of cattle from settlers the Cherokee began to keep cattle, sheep, chickens and other domesticated food stock animals.
1985-1996 Jeep Cherokee XJ should interchange 1997-2001 Jeep Cherokee XJ should interchange
There are no known recall on the recent models of the jeep cherokee. However, there are some recalls on older models and other jeep brands.
possibly a chrysler 300 and the challenger.
93 to 94 for 4.6 dohc engine interchange book
only another 2.4L
96 to 00
Hey Kelly==A good wrecking yard will have the software to tell you this. GoodluckJoe
95&97 s-10 blazers and s-10 pickups.
I´m the owner of 1991 model and I have made a rebuilding, and I think that the rear shock can interchange for for all the models between 1989 and 2000
None. Only other models of Corvair, greenbriar, Lakewood wagon etc. proprietary to the model.
Have a mountaineer with a bad 5.0 liter engine. What other 5.0 ford engines will interchange with the mercury engine?
I assume you are asking if those two engines are interchangeable. If they are both front wheel drive engines of the same year then they will most likely interchange. If one is out of a rear wheel drive in line car and the other is a front wheel drive then they will probably not interchange. If they are both rear wheel drive engines of the same year then they will probably interchange. The starter on an in line rear wheel drive car is on the intake side of the car while the starter on a front wheel drive model is on the exhaust side of the engine. The location of the bolt holes for the front engine mount also varies on different models. I am told that there are four different versions of the 2.5L engine. Bottom line: If the starter is on the same side and they have matching motor mount bolt holes then they will likely interchange.