Well ...duh?
so i understand it is humming when it is plugged into the guitar.
sounds like a grounding/loose touch problem.
aside from the obvious clean up (a brush with a contact clean fluid applied on- watch that it doesnt hit the guitar finish)
the jack cavity inside your guitar is quite flexible to fit both the top of the jack head and the tube.
so if you can reach it without causing damage and gently flex it - good.
if you have no idea let a repairman do the job as it may require new grounding and gentle assembly of the jack plate.
The cables are exactly the same.
There are many types of guitar effects and volume pedals. The cable from the guitar is plugged into the jack marked IN and another cable is plugged into the one labled OUT and then plugged into the Amplifier.
Yes you need a cable. It is called a 1/4 inch instrument cable. You can find them at all local music stores or my favorite www.musiciansfriend.com Yes you need a cable. It is called a 1/4 inch instrument cable. You can find them at all local music stores or my favorite www.musiciansfriend.com
Acoustic-electric guitars are acoustic styled guitars with a pickup either outside or inside the hollow body. You plug a cable into it like you would a normal electric guitar and it can be used through an amplifier to make the sound louder. They can also be played without being plugged in just like a normal acoustic guitar
the only way to hook rock-smith to a acoustic guitar is to buy a pickup that mounts into the sound hole. this requires drilling a hole in the guitar for the female jack that is on most electric guitar's so you can plug in a cord. the pickup is wired to the female jack that is installed.
with a guitar cable into the guitar and into a guitar amplifier. For beginners I recommend the line 6 pod.
The cables are exactly the same.
To play the electric guitar, you need the guitar itself, an amplifier, a cable to connect the guitar to the amplifier, and a pick or your fingers to strum the strings.
There may be no sound coming from your electric guitar due to issues with the cable, amplifier, or guitar itself. Check the cable connections, volume settings, and try a different amplifier to troubleshoot the problem.
Well mostly, an amplifier (pretty obvious) but to connect to it, a guitar cable.
To connect an electric guitar to a computer, you will need an audio interface with a guitar input, a USB cable, and recording software. Simply plug your guitar into the audio interface, connect the interface to your computer using the USB cable, and open the recording software to start playing and recording your guitar.
guitar to cable to amplifier there is a 1/4 stereo or mono jack you plug the cable into , from there plug the other end into the amplifier and press on
The guitar itself, a cable, fingers and a dash of talent.
You won't ruin anything within your guitar if you remove your guitar cable from it! We guitarist plug and unplug cables from guitars all the time!
Your electric guitar may not be producing sound due to issues with the cable, amplifier, volume settings, or a malfunction in the guitar's electronics. Check these components to troubleshoot the problem.
You may be referring to instrument cables.
Check your input on your guitar, or check your cable...