If it's not the fuse (see owners manual for which one) then now is the perfect opportunity to get an aftermarket head unit. The Bose units are marginally OK only because the individual speakers have their own Bose amp attached to it.
It is probably the output amplifier chip.
2004 GMC Envoy is on page 28 http://documents.victorytechnologies.com//documents/product/929.pdf 2004 GMC Envoy is on page 28 http://documents.victorytechnologies.com//documents/product/929.pdf
Behind the panel on the right hand side in the cargo area.
if the radio came out of same truck nothing is needed to do should be already set up and vin in radio. if you switched radio from another truck into this one it needs to be programmed and set up at a dealer.
ok first thing you need to do is go to a radio store and buy the right plug that is made for your truck.they will tell you there what plug you will need,and everything else is easy from their wires should be color coded then it will be easy to install.
It is probably the output amplifier chip.
Riunning lighs not working 2002 gmc envoy
The 1999 GMC stock radio has and auxiliary port on the back of the radio. Plug your sub woofer into the auxiliary port.
The wiring harness for the radio in a 1991 GMC Pickup is going to be behind the radio. The wiring harness is plugged into the back of the radio. The fuse for the radio is in the fuse box located on the driver's side below the dashboard.
yes
check to make sure that the other speakers are not blown before you change the radio and bypass the amp.
some buttons are out in the radio panel of my gmc Yukon 2003
Yes it does
its probly the condencer
Have the fluid and filter changed
To remove the radio from a 1995 GMC Vandura van, first disconnect the vehicle's battery to ensure safety. Then, carefully pry off the trim panel surrounding the radio using a flathead screwdriver or trim removal tool. Once the trim is removed, unscrew any mounting screws holding the radio in place, and gently pull the radio out of the dashboard. Finally, disconnect the wiring harnesses and antenna cable from the back of the radio to complete the removal.
It's the Throttle Actuator Control Module,Dealer repair price of around $600.00. Good Luck :-)