0
What else can I help you with?
Why does my amplifier buzz when I turn up the volume?
Your amplifier may buzz when you turn up the volume due to interference or a ground loop issue. This can be caused by improper wiring, a faulty cable, or electronic components picking up unwanted signals.
What are you increasing when you turn up the volume on a radio?
When you turn up the volume on a radio, you are increasing the amplitude of the sound waves, which makes the sound louder.
How do I properly set up an amp for my guitar?
To properly set up an amp for your guitar, first plug in your guitar cable to the input jack of the amp. Adjust the volume and tone controls to your preference. Make sure the amp is turned on and set to the desired channel. Experiment with the settings to find the sound you like. Be mindful of the volume level to avoid damaging your ears or the equipment.
How to overdrive a tube amp at low volume effectively?
To overdrive a tube amp at low volume effectively, you can use an attenuator or a power soak to reduce the overall volume while still pushing the tubes to achieve that desired overdriven sound. This allows you to crank up the amp's gain without disturbing others around you.
How can I turn up the volume in music to enhance the listening experience?
To enhance the listening experience in music, you can turn up the volume by adjusting the volume control on your device or speakers. Be mindful of the volume level to avoid damaging your hearing.
Why does my amplifier buzz when I turn up the volume?
Your amplifier may buzz when you turn up the volume due to interference or a ground loop issue. This can be caused by improper wiring, a faulty cable, or electronic components picking up unwanted signals.
Why does Home theater volume increase?
the short answer is that as you turn up the volume up it decreases the resistence in between the amp and the speakers, less resistence = more volume
Can you get a metal tone on an amp with only drive gain and tone settings?
you can as long as you have distortion and you make a lot of harmonics, and chords Turn up the volume on your guitar, turn up the gain on the amp and then adjust the volume on the amp to how loud you want. Adjust the tone to what you want probably high treble.
How would you spell a guitar feedback sound?
Basically you play a note or chord (chord works best) and hold it, let it ring, then you go right up to your guitar amp and hold the guitar right up to the speaker then you slowly turn the volume on the amp up until you hear feedback. And, while the guitar is feeding back, you can shake the guitar, or wiggle the volume knob a little to get a tremolo effect. Just mess around and experament.
What should you do so that sound will come out of the amp and what should the volume be on the amp and guitar?
You need to plug the Amps power cord into the wall (or multi-box) and you will need to flick the power switch. The guitar lead will need to be plugged into the input (little round hole in front of guitar amp), and into the guitar. As to the volume, it is up to personal preference. If you want it loud, turn it up loud. I like to set my guitar volume to 8 or 9. and then change the amp volume until it is the right volume.
What is gain knob for?
Gain is the INPUT volume of your guitar into the amp, drive select will select different types of distortion (or drive) and drive volume is the OUTPUT volume from the amp. Treble, Middle and Bass are all equalization knobs, turn the bass up for more bass in the signal and same applies with middle and treble or turn then down for less of the frequency in the signal
What if you have 2 subwoofer and for 1 speaker its 1500rms how many watts should my amp be?
the amp has to be less than 3000 or it will blow the speakers at full volume., but it can be more so long as you dont turn it up full
How do you make an electric guitar work?
You need a working amplifier. You plug the amplifier into an electrical outlet, then you plug the guitar into the amp (via a patch cord). Turn on the amp, turn up the volume and you are good to go. Use what ever is available to make the strings sound.
How do you fix your line 6 spider iv 15 amp when the volume goes way up every time you switch channels?
Turn the Chan vol all the way down before switching the channel, then turn it back up.
How do you turn up the volume on the t-mobile sparq?
how to turn the volume up on my t-mobile unity.
Guitar wont work with Distortion I have an Ibanez RG Series electric guitar and it works fine when i plug it in my amp but when i use distortion nothing comes out my other guitars work fine.?
I cannot think of any way how this problem could occur, apart from this..... Your amp will have two (or more) channels, one of which is clean, and the other will be overdrive (with distortion), and there is a volume adjuster on your amp for each channel, so when you play on clean, the volume is turned up, and you can hear it, but when you switch to overdrive (probably by pushing a little button) no sound comes out because the volume for this channel is turned down, so look for another volume switch and turn it up. So, basically, there is a volume adjuster for each channel, not just for the whole amp, so find the other and turn it up! Hope this was helpful!!!
How do you change the volume of an electric guitar?
There are several ways to increase the volume of an electric guitar. The two obvious ways would be to turn up the volume knob on the guitar itself, or turn up the master volume on your amp. If you have no master volume on your amp, use the post gain for the channel you are playing through. Other things also effect the volume of a guitar. Changing the pickups can effect the guitar's output, as can changing the pots, strings, etc. Also, depending on the pedals used, certain pedals can decrease the volume of the guitar being played, but a simple solution to that would be running your pedals through an effects loop.
