"Watts RMS" is better represented as "Watts average". Since 1000 watts is 1kw you have "1000 watts average" and you can derive "1Kw average". So 1000 watts RMS will consume 1 Kw
Total power output (Total RMS output): 1000 watts
Rms is watts that's the amount of watts a speaker is rated for.
RMS (Root Mean Square) power ratings, such as 150 RMS, refer to the continuous power output of an audio system. To convert RMS power into watts, you can directly equate them, as RMS is a measure of watts. Therefore, 150 RMS is equivalent to 150 watts.
2000 watts RMS is equivalent to 2000 watts. RMS (Root Mean Square) is a method used to measure the power of an electrical signal.
The Alpine 3552 amplifier is rated at approximately 50 watts RMS per channel at 4 ohms, and it can deliver around 75 watts RMS per channel at 2 ohms. In bridged mode, the amp can provide about 150 watts RMS. Overall, the total power output depends on the configuration and load impedance used.
500rms
Total power output (Total RMS output): 1000 watts
Total power output (Total RMS output): 1000 watts
Rms is watts that's the amount of watts a speaker is rated for.
RMS (Root Mean Square) power ratings, such as 150 RMS, refer to the continuous power output of an audio system. To convert RMS power into watts, you can directly equate them, as RMS is a measure of watts. Therefore, 150 RMS is equivalent to 150 watts.
Scroll down to related links and read "Why there is no such thing as 'RMS watts' or 'watts RMS' and never has been".
2000 watts RMS is equivalent to 2000 watts. RMS (Root Mean Square) is a method used to measure the power of an electrical signal.
RMS watts is not a real measurement. The correct measurement is "average power", which is measured in "watts". It is dervied from RMS voltage, but that doesn't make it "RMS watts". "RMS watts" would be 22% higher than the correct "average watts".
75 x 1 Watts RMS @ 4 Ohms 150 x 1 Watts RMS @ 2 Ohms
Find out what the rms is for that sub woofer,if it'1000 then find out what the max is,then you could go between the rms power and the max power to get the right amount of watts.
1000 watts rms should be plenty
Scroll down to related links and read "Why there is no such thing as 'RMS watts' or 'watts RMS' and never has been".