15 amps
To calculate the output amps of a 600kVA generator at 240V, you would use the formula Amps = kVA / Volts. In this case, it would be 600kVA / 240V = 2500 amps.
The basic formula for the Voltage, Current, Power relationship is P=I*E. To find one when the other two are known, simply fill in the two you know and solve. In this case P=1000W and Voltage = 240V (It is important that you pay attention to the unit definer here, if it were 240 mV, you would have Voltage = .240V and so on). 1000W = I * 240V I = 1000W/240V I = 4.17A
1KW is 1000w. one watt is equals to product of volt and current. current=watt/volt =1000/240 =4.1667 amps
To calculate amperage using Ohm's Law (I = V/R), you need to know the resistance (R). In this case, with a voltage of 120V and frequency of 60Hz, you can't determine amperage without knowing the resistance of the circuit.
To convert kilowatts to amps, you need to know the voltage of the circuit you are calculating for. Assuming a standard voltage of 240V, 11kW would be approximately 45.8 amps.
To calculate the output amps of a 600kVA generator at 240V, you would use the formula Amps = kVA / Volts. In this case, it would be 600kVA / 240V = 2500 amps.
You need amps
A 240V well pump typically draws around 10-15 amps.
In North America, the standard is 240V, 60Hz.
Most appliciances that are built for use with 220V would normally be fine with 240V. In most cases, they are also labeled 220-240V. Depending on how critical the application is, you should probably check with the manufacturer.
two hot one ground
yes.
The basic formula for the Voltage, Current, Power relationship is P=I*E. To find one when the other two are known, simply fill in the two you know and solve. In this case P=1000W and Voltage = 240V (It is important that you pay attention to the unit definer here, if it were 240 mV, you would have Voltage = .240V and so on). 1000W = I * 240V I = 1000W/240V I = 4.17A
This can not be answered with the information you have given. 60Hz does not relate the the current draw so wire size can not be calculated.
1KW is 1000w. one watt is equals to product of volt and current. current=watt/volt =1000/240 =4.1667 amps
240v is equal to how many amps
To calculate amperage using Ohm's Law (I = V/R), you need to know the resistance (R). In this case, with a voltage of 120V and frequency of 60Hz, you can't determine amperage without knowing the resistance of the circuit.