0
What else can I help you with?
How do you wire 2 new lights with on-off switches using wires coming from an existing outlet?
You can attach/splice into the power feed to outlet (ways of doing this can vary with how the outlet is wired but make sure that all or part of the outlet isn't controlled by an existing switch). You can then take the hot, neutral and ground to a light fixture or to the first switch, then to the second switch. It is normally easier to do this project by taking power to the light (s) first, with 2 wire drops to the switches, from basement or attic.
How can you connect a lamp to the power supply in such way so that the the lamp may be turned on and off independently by any of the three switches?
You can achieve this by using a three-way switch setup. Connect the power supply to the common terminal of the first switch, the lamp to the common terminal of the third switch, and the traveler terminals of the three switches in a loop. This way, you can turn the lamp on and off independently from any of the three switches.
Is it possible to control a light switch with remote control?
Yes. the two switches are called '3-way' switches. You will have to turn the fan/light on with one of the switches and leave BOTH switches in that position. The remote control unit will have to be wired in between the switch that is supplying power to the devices and the devices. This is the simplest way. You could also disable one of the switches and replace the remaining switch with the RC unit. If you are not sure how to deal with 3-way switches, learn about them first, or call a good electrician to do all of the work. Remeber that the black wire is hot, but only if the house was wired properly in the first place.
There is two rooms one has three light bulbs in it the other has three switches you are only allowed in the first room once you start in the secon how do you find out which switch operates which bulb?
You turn on two switches wait 5 min. and turn one of the switches off! go in the next room the cold one belongs to the switch you never turned on..the warm one the switch you only left on 5 min and the lite one to the switch that is turned on! you switch on one switch for a few minutes, one for ages, and dont turn the other one on at all. you go through to the other room, the bulb that is warm is operated by the first switch, the roasting hot bulb (that would burn your hand) is operated by the second switch, and the cold bulb is operated by the third switch.
Can you plant seedlings directly in the ground without first transplanting them?
You can plant seedlings (or even just seeds) directly into the ground, without cultivating them in pots first, as long as the time of year is right, and the soil is right.
Is the first step in preparing the motherboard to go in the case is to set the jumpers or dip switches?
Ground yourself.
How can I properly wire light switches in series to ensure they function correctly and efficiently?
To properly wire light switches in series, connect the hot wire from the power source to the first switch, then connect the hot wire from the first switch to the second switch, and so on. Make sure to connect the neutral wires together and ground wires to the switches. Test the switches to ensure they function correctly and efficiently.
How do you wire multiple light switches in a single circuit?
To wire multiple light switches in a single circuit, you would connect the hot wire from the power source to the common terminal of the first switch. Then, connect the hot wire from the first light fixture to the common terminal of the second switch. Finally, connect the hot wire from the second light fixture to the common terminal of the last switch. Connect all the neutral wires together and connect the ground wires to the switches and fixtures.
Which belongs first HTML or xhmtl?
HTML came first.
When were Push button light switches first used?
1912
What family sodium belongs to?
Sodium belongs to the alkali metals family, which is in the first group of the periodic table.
The element sodium belongs to which family?
it is belongs to the Alkali metal family, it is on the first column of the periodic table.
How do you ground pound in supermario 64?
To perform a ground pound in Super Mario 64, first, jump into the air by pressing the A button. While in the air, press the Z button (or the crouch button on some controllers) to execute the ground pound. Mario will slam down onto the ground, damaging enemies and breaking certain objects. This move can be particularly useful for activating switches and uncovering secrets in the game.
Was there a keyboard on the first computer?
No, the first computer's used switches ( 0, 1 ) to set things.
What remix version of Keep you Hanging On is played in the first episode of Glee?
You Can Do It/You Keep Me Hanging On by Ice Cube/The Supremes.
Which writer recorded the hanging gardens first?
boo
Who made the first hanging mobiles?
cadwell or caldwell
