A potentially lethal electric current is typically on the order of 100 milliamperes (mA) or higher. Currents as low as 10 mA can be dangerous if they pass through the heart. It's important to remember that even lower currents can cause harm depending on the specific circumstances.
It should contain some IONS, or charged particles.
Electric current can be started by closing a circuit, allowing the flow of electrons. This can be done by pressing a switch to complete the circuit. To stop the flow of electric current, the circuit needs to be opened, typically by opening the switch, which interrupts the flow of electrons.
An electrical current will cause an electromagnet to energise.
Ultimately this is a special case of the Second Law of Thermodynamics.In the case of an electric circuit, consider Ohm's Law. Without a voltage, you will have no current. Also, if a current flows, keeping up the voltage requires power.
well, current is the movement of free electrons so if you break a point in the wire you effectively stop the electrons from flowing as the electrons need to be touching each other in order to pass on energy or charge. The reason why if there is a gap in the circuit the electrons dont just jump it is because of resistance of air as the electrons in air are not free to flow they are not conduction electrons unlike in a metal such as copper wire.
energy
heat
Ohms law
In order to change an electric current, you must first change the conductor, doing so will change the flow of atoms which will change the electrical discharge.
It should contain some IONS, or charged particles.
The energy carried by an electric current depends on a conductor in order to flow. an Insulator disrupts the flow
Here are the modern ways of execution in the USA by order of usage Lethal Injection Electric Chair Gas Chamber Firing Squad Hanging
In order for an electric motor to spin freely you will have to make sure you have one thing. You have to have the electric current for the motor to run freely.
Electric current can be started by closing a circuit, allowing the flow of electrons. This can be done by pressing a switch to complete the circuit. To stop the flow of electric current, the circuit needs to be opened, typically by opening the switch, which interrupts the flow of electrons.
Ohm's law is the basic answer. Voltage = Current * Resistance is ohms law. In order to find current divide voltage by Resistance V/R=I where I is current.
A series circuit has only one path for an electric current to flow through. In a series circuit, all the components are connected in a line, so the current has to pass through each component in order to complete the circuit.
In order to make an electric current flow, you need a closed circuit that includes a source of electrical energy, such as a battery or a power outlet, and a complete path for the current to flow, typically made up of conductive materials like copper wires. The flow of electric current occurs when there is a potential difference (voltage) between two points in the circuit, causing electrons to move from one point to another.