0
What else can I help you with?
What is the pH of pure water in the beaker before the acid is added?
The pH of pure water is 7 before the acid is added. This is because pure water is neutral, with an equal balance of hydrogen (H+) and hydroxide (OH-) ions.
What precautions should be taken when using 6.0m HCl?
1.) Safety glasses to shield your eyes from any contact with acid 2.) Pouring the solution ( into maybe a conical flask, beaker etc.) at eye level to avoid spillage.
How do clean a beaker?
Acid washing it should do. I assume you are in a lab...in which case a 1:1 Hydrochloric Acid solution can be poured into the flask. DON'T FORGET TO PUT GOGGLES AND GLOVES ON. Put the lid on. Shake the flask and turn it to ensure all surfaces of the glass inside are being washed with the acid. Then, give it a good triple rinse with de-ionized water. If you are just at home, pour in some white vinegar and let it sit for a while. That should break up anything that's inside.
What equipment do you use in a neutralization reaction?
In a neutralization reaction, you typically use a beaker or flask to hold the solution, a stirring rod to mix the reactants, a pH indicator to monitor the reaction progress, and a burette to add the acid or base solution gradually. Safety equipment such as goggles and gloves are also recommended to protect against any potential splashes or spills.
What is the substance remaining in the beaker after evaporaiting the excess acid of hydrochloric acid with manganese?
This compound is the manganese dichloride.
What happens to the pH in the beaker as the acid is added?
The pH drops. The stronger the acid the lower the pH.
Why the Erlenmeyer flask does not have to be dry and why water may be added after the 25.00-centimetre Cube of Acid has been pipetted in?
?
Which salt will be made if hydrochloric acid is added to the beaker?
If hydrochloric acid is added to a beaker, the salt formed will depend on the other reactant present. For example, if sodium hydroxide is also present, sodium chloride (table salt) will be formed. The specific salt formed will depend on the combination of the acid and base used in the reaction.
What is the precaution step of acid base titration?
1.The beaker,pipette and the flask should be washed properly with distilled water. 2.Pipetting has to be accurate in order to avoid excess addition of the titrating agent. 3.The flask containing the indicator (phenolphthalein or methyl orange) must be shaken well while acid is added to it. 4.The acid should be added dropwise. 5.Contamination should be avoided. 6.Excess of indicator should not be used. 7.The flask into which acid is added dropwise should be removed as soon as the indicator changes color. 8.Readings should be taken avoiding the parallox error.
How should the pH of a material in the Acidic beaker compare to that in the Basic beaker before any acid or base is added?
The material in the acidic beaker should have a lower pH compared to the material in the basic beaker before any acid or base is added. This is because the acidic beaker contains an excess of hydrogen ions, resulting in a lower pH, while the basic beaker contains an excess of hydroxide ions, leading to a higher pH.
A flask contains 300.0cm3 of a 0.500 acid solution How many moles of the pure acid must have dissolved?
All of the moles of pure acid will have dissolved in the flask.
If A scientist pours 3.48 ML of hydrochloric acid into a beaker How many liters of hydrochloric acid did the scientist pour into the beaker?
The scientist poured 0.00348 liters of hydrochloric acid into the beaker.
What is the pH of pure water in the beaker before the acid is added?
The pH of pure water is 7 before the acid is added. This is because pure water is neutral, with an equal balance of hydrogen (H+) and hydroxide (OH-) ions.
Zinc is added to a beaker containing hydrochloric acid and the beaker gets warm. What type of reaction is this?
This is a chemical reaction known as an exothermic reaction, as it releases heat. In this reaction, the zinc reacts with the hydrochloric acid to produce zinc chloride and hydrogen gas.
What happens if you added soduim hydroxide solution to some hydrochloric acid in a beaker?
When sodium hydroxide solution is added to hydrochloric acid in a beaker, a chemical reaction occurs, resulting in the formation of water and sodium chloride salt. This reaction is exothermic, meaning it releases heat energy. The pH of the resulting solution will increase due to the presence of sodium hydroxide, which is a strong base.
What precautions should be taken when using 6.0m HCl?
1.) Safety glasses to shield your eyes from any contact with acid 2.) Pouring the solution ( into maybe a conical flask, beaker etc.) at eye level to avoid spillage.
How do clean a beaker?
Acid washing it should do. I assume you are in a lab...in which case a 1:1 Hydrochloric Acid solution can be poured into the flask. DON'T FORGET TO PUT GOGGLES AND GLOVES ON. Put the lid on. Shake the flask and turn it to ensure all surfaces of the glass inside are being washed with the acid. Then, give it a good triple rinse with de-ionized water. If you are just at home, pour in some white vinegar and let it sit for a while. That should break up anything that's inside.
