No bell wire is not meant to be 230V.
false
For a 230V motor running 90ft away, it is recommended to use at least 12-gauge wire to minimize voltage drop and ensure efficient operation. However, it is always best to consult the motor's specifications and a qualified electrician to determine the most appropriate wire gauge for your specific setup.
No. A coiled wire can never become an electric bell without some more piecesand parts. When you have those, however, assembled in the right way, it's truethat passing an electric current through the coiled wire will cause the bell to ring.
If you live in Europe, then the brown wire is the line ('hot') conductor; a blue wire is the neutral conductor, and a yellow/green striped wire is the protective (earth) conductor.
No bell wire is not meant to be 230V.
false
connect the Red Yellow blue phases
In a 230V plug, the standard color coding is as follows: the brown wire is the live (L) wire, the blue wire is the neutral (N) wire, and the green/yellow striped wire is the earth (E) wire. The live wire carries the current, the neutral wire returns it, and the earth wire provides a safety path in case of a fault. Always ensure proper connections and safety measures when dealing with electrical installations.
AWG # 6
Use what is called bell wire or thermostat wire.
Your electrician is correct on this. However, the pump is designed for 230V and will use less electricity, thus saving money if wired for 230V. Yeah, if you have to rewire for 230 V then it would be more expensive until your savings had consumed or offset the expense.
no bell wire is normally 2 core and phone wire is milti core 6 or more but you can use it as phone wire on a single inbound phone line, one number many phones of it.
For a 230V motor running 90ft away, it is recommended to use at least 12-gauge wire to minimize voltage drop and ensure efficient operation. However, it is always best to consult the motor's specifications and a qualified electrician to determine the most appropriate wire gauge for your specific setup.
No. A coiled wire can never become an electric bell without some more piecesand parts. When you have those, however, assembled in the right way, it's truethat passing an electric current through the coiled wire will cause the bell to ring.
Most local hardware stores carry bell wire. The big-box stores probably only carry the DIY wireless kits. A suitable replacement is furnace thermostat wire.
That is a body to engine ground wire.