Yes, and the 135V bulb will last longer than the 120V bulb because the filament is thicker.
The downside is that the higher voltage bulb will not be quite as bright, and its light may be slightly more yellow in color (the color temperature will be less when run on a lower than design voltage).
A little bit less than a 25 watt incandescent bulb - the the table below:Bulb brightnessA 100 watt Bulb is rated at approximately 1700 lumensA 60 watt incandescent bulb is rated at approximately 800 lumensA 40 watt bulb is rated at approximately 400 lumensA 25 watt bulb is rated at approximately 180 lumensA 4 watt night light bulb is rated at approximately 20 lumens
which has more resistance 100 watt bulb or 60 watt bulb? In short, the 60 watt bulb has more resistance. Power can be calculated using the following formula: P = (V^2)/R The power rating for a light bulb is measured using a 120 Volt source. Since the voltage will be the same for both light bulbs, using the formula, the bulb with the lowest resistance would have the greatest power.
135 cm is about 4.43 feet.
135 pounds = 61.23 kilograms.
it equals ten kilograms
LCM for 135 and 120 is 1080.
The greatest common factor (GCF) of 120 and 135 is 15.
255
120 over 135 in lowest terms is 8/9
132135+135+135+135+120=660 660/5=132
135
It is: 15
135 It is 15 more than 120 and 15 less than 150
135 because 60+60=120 1/4 of 60 =15 120+15=135
To find the greatest common factor (GCF) of 120 and 135, we need to determine the largest number that divides both 120 and 135 without leaving a remainder. One way to find the GCF is to list the factors of each number and identify the greatest one they have in common. The factors of 120 are 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 24, 30, 40, 60, and 120. The factors of 135 are 1, 3, 5, 9, 15, 27, 45, and 135. The greatest common factor of 120 and 135 is 15.
11.1% decrease.
135=3s +15 120=3s 40=s