0
The metal halide light is a commercial fixture. Wire it to 120 volt. 277 volt is the star point voltage of 3 phase 480 volts. Likewise 347 is the starpoint of 3 phase 600 volt. By wiring it to 240 volts the voltage might not be high enough to ignite the lamp. Try it and see, it won't do any harm to the fixture. Make sure that the wires that are not connected are taped off as there will be voltage on them.
What else can I help you with?
Why does twilight cb-500md lighting power control box transformer put out 4 volts when selector switch is off or when in dawn to dusk and it is light out?
The 4 volts is what it takes to operate the light/motion-sensing device and is on so long as there power to the fixture.
How to power a 86 volt light?
You can power an 86 volt light with a power source that outputs 86 volts, such as a specific battery or power supply designed for that voltage. Ensure that the power source can provide enough current to safely operate the light without damaging it.
How many volts are in light switches?
Light switches typically operate at 120 volts in residential settings in the United States. However, it is important to note that the actual voltage may vary depending on the specific electrical system and location.
Which consumes more power 480 volts or 240 volts?
Voltage itself does not consume power; rather, power consumption is determined by the combination of voltage and current. If the power demand remains the same, a higher voltage system like 480 volts will require less current to deliver the same amount of power compared to a 240-volt system. So, in general, a 480-volt system would be more efficient in terms of power transmission compared to a 240-volt system.
Does a 30 amp camper plug have 220 volts?
No, a 30 amp shore power plug is strictly 120volts. A 50 amp shore power plug is technically a 220v system, however the camper uses the two 120v wires in the cord separately. There are no 220v appliances in RV's today.
How many volts does a magnetic control system operate on?
120 volts
How many volts are in a light?
There are no volts in a light. A light consumes power.
Why does twilight cb-500md lighting power control box transformer put out 4 volts when selector switch is off or when in dawn to dusk and it is light out?
The 4 volts is what it takes to operate the light/motion-sensing device and is on so long as there power to the fixture.
How to power a 86 volt light?
You can power an 86 volt light with a power source that outputs 86 volts, such as a specific battery or power supply designed for that voltage. Ensure that the power source can provide enough current to safely operate the light without damaging it.
How many volts are in light switches?
Light switches typically operate at 120 volts in residential settings in the United States. However, it is important to note that the actual voltage may vary depending on the specific electrical system and location.
How many amps are required for 100W light bulb operate on 110 volts?
amps equals watts divided by volts.
How many volts are in anonion to power a light bulb?
Onions don't have volts.
How many volts are there on a mustang 2000?
All Mustangs operate on a 12 volt system.
What does a power supply receive 120 volts of?
ELECTRICITYNote: Some power supplies operate on 120 volts 60 Hz ac but others operate on 230 volts 50 Hz ac.Which voltage your power supply uses depends on which country you are in.For more information see the answers to the Related Questions shown below.
Which consumes more power 480 volts or 240 volts?
Voltage itself does not consume power; rather, power consumption is determined by the combination of voltage and current. If the power demand remains the same, a higher voltage system like 480 volts will require less current to deliver the same amount of power compared to a 240-volt system. So, in general, a 480-volt system would be more efficient in terms of power transmission compared to a 240-volt system.
Does more volts equate to more power in an electrical system?
Yes, in an electrical system, more volts typically equate to more power. Power is calculated by multiplying voltage by current, so increasing the voltage can increase the power output of the system.
How do you grade up micro volts to volts which can operate any small devices?
The voltage can be changed by a transformer, but the power remains constant. So if you have a supply of 1 microvolt, it would have to supply 1 million amps to give a power of 1 watt (power = volts times amps).
