0
If you are referring to the outlets, then you most likely have an open circuit: a wire may not be connected to one of the outlets, not completing the circuit. What I would do is turn the breaker on and off then plug something into the outlets and see where you are losing power.
It could even just be a loose wire. If you still do not have any power and you do not have - or really know how to use - an electrical test meter, I would suggest you seek help.
Popping a breaker means a heavy load I do not know what type of panel box you have or how old it is, you still need an electrical meter or help to correct this problem if the breaker failed to trip.
Non-functioning outlets(LIFE SAFETY WARNING! [disclaimer]Electricity is dangerous!
You can be injured or killed!
Improper installations can cause fire, injury and death!
Should you be doing this yourself?)
1.] The breaker may be tripped, but not have an external mechanical indication [the handle stuck]. Reset your breakers anyway and the circuit may reset.
2.] The breaker may have failed and needs to be replaced.
3.] One of the splices or screw termination connections for the conductors in the circuit failed completely or partially and needs to be repaired.
4.] There is some device in the circuit you have not recognized that is interrupting the circuit.
If there is a bad/failed connection at a device it can often be because a "speed-wire" connection - those little stab hole terminations - in the back of a device has failed
- And remember that it can be the Hot OR the Neutral that is open!
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS
- WORK SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
If you do this work yourself, always turn off the power
at the breaker box/fuse panel BEFORE you attempt to do any work AND
always use an electrician's test meter having metal-tipped probes
(not a simple proximity voltage indicator)
to insure the circuit is, in fact, de-energized.
What else can I help you with?
If you sleep by a outlet at night even though nothing is plugged in will it hurt you?
My bed is right in front of an unplugged electrical outlet. So far I've had no health problems. So, no, it will not hurt you (unless your made of metal, maybe)
Outlet stopped working and it is not a GFCI?
First, check the circuit breakers; make sure they are all ON. Find out if any other outlets on the same breaker are working; it's always possible that a breaker is faulty. If the breaker is on and everything else on the circuit is working, it could be as simple as a poor connection inside the outlet. Also even though the outlet is not a GFCI, it may be fed from a GFCI outlet. Check near by outlets to see if any are GFCI and are tripped.
Can a 115 volt icemaker be plugged into a 110 volt receptacle outlet?
There is no problem with that voltage. As long as the voltage is plus or minus 5% of the nominal voltage of 115 volts it is considered to be in the 120 volt range. Even though there is only a 110 volt potential at the outlet it is still rated to a voltage of 120 volts maximum. The second consideration is the amperage of the icemaker. Most 120 volt receptacles are rated at 15 amps and are fed with a #14 wire that is rated at 15 amps. As long as the icemaker does not draw more amperage than the receptacle is rated for the connection will be fine. If the icemaker draws more that 15 amps the breaker will trip.
Does it matter if a 30A dryer is plugged into a 30A outlet through a 50A pigtail?
for USA, Canada and countries running a 60 Hz power supply service.If the current draw through the circuit is less than the rated current of the circuit then there is no problem. In this case if it is a 30 Amp dryer fed through a 50 amp outlet on a pigtail that has a 30 Amp plugplugged into a 30 Amp outleton a circuit protected by a 30 Amp breaker No worries! It is wise to place an over-current device (fuses or circuit breakers) in your pigtail, though.-EDIT- Only if it's a 50A outlet. If you have 50A wiring on a 30A breaker you are quite safe.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
How do I get 220 volt circuit?
If you need a 220v circuit at only 15 or 20 amps: Get a new breaker to replace your 110v single pole breaker with a 220v double pole breaker. (You cannot exceed the original breaker's amperage rating unless you also replace the wire with a larger size). Shut off the panel's main breaker (the wires coming into the main breaker will remain hot, so don't touch them.) Remove the old 110v circuit's neutral (white) from the neutral bus bar in your distribution panel. Remove the old 110v circuit's hot (black) from the old 110v breaker. Remove the old 110v breaker. Install the new 220v breaker in place of the old breaker. (This may require you to rearrange some breakers if the old breaker was in between others) Reconnect the black wire to one terminal of the 220v breaker, and reconnect the white wire to the other terminal. Turn on the main breaker, and your new 220v breaker. Before you do this, be sure where the actual circuit goes. Changing 110v to 220v if the circuit is feeding regular 110v receptacles will cause damage to devices plugged into them. Be sure you remove all 110v devices (receptacles) from the circuit before converting it. If you need a 220v circuit for a dryer or other large appliance, your existing wiring will not be sufficient to do the above. You will need to install a new breaker and wiring. For this task, you should consult a professional electrician.
If you sleep by a outlet at night even though nothing is plugged in will it hurt you?
My bed is right in front of an unplugged electrical outlet. So far I've had no health problems. So, no, it will not hurt you (unless your made of metal, maybe)
Why is the outlet warm even though nothing is plugged in?
The outlet may feel warm even when nothing is plugged in due to electrical resistance in the wiring, which can generate heat. This can be caused by a variety of factors, such as overloaded circuits or poor connections. It is important to address this issue promptly to prevent potential fire hazards.
Why is the outlet not working even though the breaker has not tripped?
The outlet may not be working due to a faulty outlet, loose wiring, or a problem with the circuit. It is possible for the outlet to be malfunctioning even if the breaker has not tripped.
Why is the outlet in my room not working even though it has power?
The outlet in your room may not be working even though it has power due to a faulty connection, a tripped circuit breaker, or a damaged outlet. It is recommended to check the circuit breaker, inspect the outlet for any visible damage, and consider calling an electrician for further assistance.
Why has my outdoor outlet stopped working even though the breaker is not tripped?
There could be several reasons why your outdoor outlet has stopped working even though the breaker is not tripped. It could be due to a faulty outlet, a wiring issue, or a tripped GFCI outlet. It is recommended to check these possibilities or consult a professional electrician for further assistance.
Why is my electrical outlet not working even though the breaker has not tripped?
There could be several reasons why your electrical outlet is not working even though the breaker has not tripped. It could be due to a faulty outlet, a loose connection, a tripped GFCI outlet, or a wiring issue. It is recommended to consult a licensed electrician to diagnose and fix the problem safely.
Why is my electrical outlet not working even though the breaker isn't tripped?
There could be several reasons why your electrical outlet is not working even though the breaker isn't tripped. It could be due to a faulty outlet, a loose connection, a tripped GFCI outlet, or a wiring issue. It is recommended to consult a licensed electrician to diagnose and fix the problem safely.
Why has my electrical outlet stopped working even though the breaker is not tripped?
There could be several reasons why your electrical outlet has stopped working even though the breaker is not tripped. It could be due to a faulty outlet, a loose connection, a tripped GFCI outlet elsewhere in the circuit, or a wiring issue. It is recommended to have a qualified electrician inspect and troubleshoot the outlet to determine the exact cause and make any necessary repairs.
Why is there no power to the outlet if the breaker is not tripped?
If there is no power to an outlet even though the breaker is not tripped, it could be due to a faulty outlet, a loose connection, or a problem with the wiring. It is important to have a qualified electrician inspect and troubleshoot the issue to ensure safety and proper functioning of the electrical system.
Why are my outlets not working even though the breaker has not tripped?
There could be several reasons why your outlets are not working even though the breaker has not tripped. It could be due to a faulty outlet, a loose connection, a tripped GFCI outlet, or a wiring issue. It is recommended to contact a licensed electrician to diagnose and fix the problem.
Why is my GFCI outlet not working even though the breaker is not tripped?
A GFCI outlet may not be working even if the breaker is not tripped due to a faulty outlet, a tripped internal mechanism, or a wiring issue. It is recommended to check for any visible damage, reset the outlet, and if the problem persists, seek professional help to diagnose and fix the issue.
Why are the outlets not working even though the breaker has not tripped?
There could be several reasons why the outlets are not working even though the breaker has not tripped. Some possible causes include a faulty outlet, a loose connection, a tripped GFCI outlet, or a wiring issue. It is recommended to check these potential issues and consult a professional electrician if needed.
