Yes, but a fact has to be taken into account that when a 230 volt rated bulb is used on a 120 volt system the wattage output is half of what the 230 volt bulb is rated at when it operates on 230 volt. So the dimmer will only be used to control half of the bulbs wattage which could bring the bulb down to a dull glow in full dimming position.
Dimmers are the devices used for controlling the intensity of electric current.We can increase or decrease the RMS voltage.A dimmer switch will let you change between brighter or darker BY:Chaudhary Hashaam Asif
"Lighting-up time" refers to the duration it takes for a light source to reach full brightness after being turned on. This time can vary depending on the type of light bulb or fixture being used. Humidity, temperature, and other environmental factors can also affect the lighting-up time of a bulb.
Yes, the rating of the fixture is the maximum size bulb that the fixture should take. The fixture is rated to dissipate a certain amount of heat that is generated by a bulb. By putting in a bigger bulb and thereby generating more heat than the fixture was designed for, could destroy the fixture. Some fires have been known to start this way.
GENERAL LIGHTING SERVICE (LAMP) Used to refer to what is more commonly called an "incandescent bulb" GLS stands for General Lighting Service (lamp/bulb). They are the standard light bulbs you are probably used to seeing around your home.
A pendant fixture is a type of light fixture that is suspended from the ceiling by a rod, chain, or cord. It typically consists of a single light bulb or multiple bulbs enclosed in a decorative shade or housing. Pendant fixtures are often used for ambient or task lighting in various areas of a home, such as kitchens, dining rooms, or entryways.
No, it is not possible to install a dimmer switch on any light fixture. Some fixtures may not be compatible with dimmer switches due to the type of bulb or wiring used. It is important to check the compatibility of the fixture before attempting to install a dimmer switch.
It depends on the fixture. Some fluorescent bulbs won't work at all with a dimmer. The safest thing to do is to contact the fixture's manufacturer.
No, you cannot install a dimmer switch on any light fixture. The fixture must be compatible with a dimmer switch and the switch must be rated for the type of light bulb being used. It is recommended to consult a professional electrician for proper installation.
Can lighting and recessed lighting are often used interchangeably, but there is a subtle difference between the two. Can lighting refers specifically to the type of fixture used in recessed lighting, which is a cylindrical canister that houses the light bulb. Recessed lighting, on the other hand, is a broader term that encompasses any type of lighting fixture that is installed into a ceiling or wall, with the light source recessed into the surface. In summary, can lighting is a specific type of fixture used in recessed lighting installations.
Dimmers are the devices used for controlling the intensity of electric current.We can increase or decrease the RMS voltage.A dimmer switch will let you change between brighter or darker BY:Chaudhary Hashaam Asif
Canned lighting and recessed lighting are often used interchangeably, but there are some differences between the two. Canned lighting refers to the fixture itself, which is typically a cylindrical metal can that houses the light bulb. Recessed lighting, on the other hand, refers to the installation method where the light fixture is set into the ceiling, creating a seamless and flush appearance. In essence, all canned lighting is recessed, but not all recessed lighting is canned.
"Lighting-up time" refers to the duration it takes for a light source to reach full brightness after being turned on. This time can vary depending on the type of light bulb or fixture being used. Humidity, temperature, and other environmental factors can also affect the lighting-up time of a bulb.
The different types of light bulb socket caps available for use in various lighting fixtures include screw-in (Edison), bayonet, pin, and twist-and-lock. These caps determine the type of bulb that can be used in a specific fixture.
No, a 2357 bulb cannot be used in place of a 2057 bulb. Although they may look similar, they have different wattages and filament designs, which can affect performance and safety. Using the wrong bulb can lead to improper lighting or potential damage to the fixture. Always refer to the vehicle’s specifications for the correct bulb type.
Yes, the rating of the fixture is the maximum size bulb that the fixture should take. The fixture is rated to dissipate a certain amount of heat that is generated by a bulb. By putting in a bigger bulb and thereby generating more heat than the fixture was designed for, could destroy the fixture. Some fires have been known to start this way.
I have but if dimmer is on low the light fixture sometimes "hums", can be anoying It also shortens the bulb life, significantly in some cases. But their are also CFL bulbs built to be used with a dimmer switch that avoid these problems.Another AnswerYou should only use CFLs specifically-designed to be used with dimmers in circuits controlled by dimmer switches. There is a proven danger of fire hazard when ordinary CFLs are controlled by dimmer switches and, so, this should NEVER be done.
Yes. It depends on the fixture. If the bulb runs at line voltage (i.e. without a transformer), then yes. If it's a low voltage halogen bulb, such as a 12 volt running off of a transformer, then you'll need to find out if the transformer is dimmable.