answersLogoWhite

0

The magnet on the surface and the metal 300 ft down - no. Lowering the magnet to the metal, then lifting - yes.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Natural Sciences

How much water in 1200 square feet 5 in depth?

To calculate the volume of water in cubic feet, multiply the area by the depth. For 1,200 square feet at a depth of 5 inches (which is 5/12 feet), the calculation is: 1,200 sq ft × (5/12) ft = 500 cubic feet. Since 1 cubic foot of water is approximately 7.48 gallons, this equals about 3,740 gallons of water.


What is 1500 feet of water converted to psi?

If we have six (6) feet of water, that will convert to about 2.6 psi (pounds per square inch).


What is the PSI at 400 feet below sea level?

The pressure of liquid acting on a container or other body increases at the rate of 1 atmosphere or about 14.7 lbs. per square inch for every increase of 33 feet in depth. So doing the math results in: 400ft./33ft. = 12.121. Multiplying that by 14.7 lbs. per square inch yields about 178 lbs. per square inch at 400 feet deep.


Average depth of the water table in Colorado?

The average depth of the water table in Colorado varies across the state, typically ranging from a few feet to hundreds of feet below the land surface. Factors such as precipitation, groundwater recharge rates, and local geology can influence the water table depth in different regions of Colorado. Local monitoring and data collection efforts help determine specific water table depths in different areas.


How do you figure out the number of cubic feet of sand in square feet?

To determine the number of cubic feet of sand in square feet, you would need to know the depth of the sand in feet. Once you have the depth, you can multiply the area in square feet by the depth in feet to calculate the volume in cubic feet. This is done by using the formula Volume = Area x Depth.

Related Questions

How many feet of depth is 1000 atmospheres?

1,000atm is about 33,900 feet of water depth.


What is the depth to which this Seiko is water resistant?

660 feet is the water proof depth.


A rectangular pool is 20 feet by 30 feet. The depth of the pool is 60 inches but the depth of the water is three fourths of the depth of the pool. What is the volume of water in the pool?

It is 2250 cubic feet.


What is the water pressure in psi at a depth of 300 feet?

At 300 feet of water depth the pressure is about 130 psi


What has more pressure on an object 260 feet depth of water or 35000 feet of altitude?

35000 feet of altitude exerts more pressure on an object compared to 260 feet of water depth. This is because the pressure exerted by the atmosphere decreases as altitude increases, while the pressure exerted by water increases as depth increases.


300 feet of sea water equals psi?

300 feet of sea water exerts a pressure of approximately 130 psi.


Is 232 feet deep a good well depth for a water well?

If that's where the water is. At that depth, it should be fairly good water, well filtered by the time it get to that depth.


What is the depth of water that is 72 feet?

Twelve fathoms


How deep in the water is one atmosphere?

4 atmospheres is about 135.6 feet of water depth.


How many feet under water is 10 atmospheres?

10 atmospheres is about 340 feet of water depth.


How deep is 25 bar in water depth?

25 bar is equivalent to approximately 250 meters (820 feet) of water depth.


How many gallons of water are there in a pool with a radius of 9ft and a depth of 4ft?

A round pool with a radius of 9 feet and a depth of 4 feet has a capacity of about 7,615 gallons of water.