You should know the maximum current drawn from the distribution box (in amps) and that must be less than the current that the extension cord is able to supply.
If there is no load plugged into the cord there will be no power consumed. The only time the resistance of the cord will come into effect is when the circuit becomes energized through the load plugged into the end of the cord.
There are several parts to an extension cord. There is the "female" end where you would plug in the appliance, the cord, and then the "male" end which gets plugged into an outlet.
Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.
It is not recommended to plug a 15 amp extension cord into a 20 amp breaker because the extension cord may overheat and pose a fire hazard. It is safer to use a cord that matches the amp rating of the breaker to prevent potential electrical issues.
Light and an extension cord. The extension cord will act as an added resistor in series. The more cord you add will only increase the overall resistance from the wall outlet. If you use a high gage extension cord, this will help reduce the resistance. But any cord will add resistance. If the gage is low, then the cord will actually heat up and you will be able to feel the heat. That is due to the resistance within the cord. Check out my sketch of how I perceive your Q: Chord + drop light w/chord ]---------------(]--------O Versus drop light w/chord ]--------O
Yes, it safe to touch a extension cord while its plugged in.
To safely connect an extension cord to an outlet box, make sure the extension cord is in good condition without any frays or damage. Insert the plug fully into the outlet box, ensuring a secure connection. Avoid overloading the extension cord with too many devices plugged in. Regularly check for any signs of overheating or damage during use.
If there is no load plugged into the cord there will be no power consumed. The only time the resistance of the cord will come into effect is when the circuit becomes energized through the load plugged into the end of the cord.
There are several parts to an extension cord. There is the "female" end where you would plug in the appliance, the cord, and then the "male" end which gets plugged into an outlet.
Yes, you can put the iPod Touch wall charger into an extension cord. That extension cord has to be plugged into a wall to be able to charge the iPod, though.
press Connect on the controller then FC1 on the receiver and it will connect (providing u have plugged the receiver in and turned your ps2 on
get a new one:)
If an extension cord gets wet while plugged in, it can cause a short circuit, leading to electrical shock or a fire hazard. It is important to unplug the cord and let it dry completely before using it again to prevent any accidents.
Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.
It is not recommended to plug a 15 amp extension cord into a 20 amp breaker because the extension cord may overheat and pose a fire hazard. It is safer to use a cord that matches the amp rating of the breaker to prevent potential electrical issues.
Yes. Connect an audio cable to the headphone jack.
I have a hcl head phone I have plugged it on but does not work