It is not recommended to replace a 350 watt power supply with a 300 watt power supply, as the lower wattage may not provide enough power for your components. It's best to match or exceed the wattage of the original power supply to ensure proper functionality of your system.
It's not recommended to use a 350 watt graphics card with a 300 watt power supply because the power supply may not be able to provide sufficient power for the graphics card's requirements. This can lead to system instability and potential damage to components. It's best to use a power supply that meets or exceeds the power requirements of the graphics card.
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
A 300 watt audio system means it has a peak power of 300 watts but the average power might be only a fraction of that, perhaps 5-10 watts. So it might run off a car battery, with an inverter to supply the correct voltage if needed. <<>> A 300 watt public address sound system will operate very nicely from as small as a 500 watt AC generator. A 1000 watt generator will give you more capacity if there are other devices that need powering.
Yes, theoretically you can power up a laptop with a 65 watt power adapter using a 300 watt DC to AC inverter, as the laptop will only draw the power it needs (65 watts). However, it's important to ensure that the inverter has low voltage and overload protection to prevent any damage to the laptop or the inverter itself during operation.
No, the 300 watt low voltage transformer will not be able to power 150 watts of bulbs 250 feet away. The voltage drop over the distance will be significant and may not provide sufficient power to light up the bulbs effectively. It is recommended to use a higher wattage transformer or install additional transformers closer to the bulbs.
It's not recommended to use a 350 watt graphics card with a 300 watt power supply because the power supply may not be able to provide sufficient power for the graphics card's requirements. This can lead to system instability and potential damage to components. It's best to use a power supply that meets or exceeds the power requirements of the graphics card.
it will burn do not do it or your pc or maybe your house will be in fire
If you mean how to use a resistance of so much power then it can be easily done through a step-down transformer which lowers the voltage supply and hence the power.
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
Personally, I wouldn't use less than a 300 Watt power supply in that situation. But then, I never use less than a 500 Watt power supply when replacing a power supply or building a computer. The advantage is, the larger power supply can easily handle the load and will not run as hot. Since electronic components typically fail more rapidly when they get hot, the larger power supply will usually last much longer. But that's just a suggestion.
A 300 watt audio system means it has a peak power of 300 watts but the average power might be only a fraction of that, perhaps 5-10 watts. So it might run off a car battery, with an inverter to supply the correct voltage if needed. <<>> A 300 watt public address sound system will operate very nicely from as small as a 500 watt AC generator. A 1000 watt generator will give you more capacity if there are other devices that need powering.
Yes you should be fine. As long as it fits in the computer, you're fine. Replace the old with the new one but keep the old one in case the new one doesn't work! 300 watts is fine for replacing something smaller. You should run only one power supply at a time. What this means is that you should replace the 185 Watt supply with the 300. Having 2 separate power supplies creates the possibility of having slightly different values for ground, +5V, and +12V DC. This can cause problems with all of your computer components. Don't use both, replace the old one with the better one. <- There are some motherboards that REQUIRE two power supplies, but you probably don't have one. They're server mb's, and the reason you use dual supplies is, if one supply dies the computer uses the live one and notifies the system operator "one supply just cooked, get me a new one pls." This eliminates a point of failure. If you've got one of these mb's, both supplies have to be the same: two 300w, two 750w, whatever. Really, though, with the amount of juice some of these new video cards pull, I wouldn't even consider installing a 300w power supply in anything except a server, a lot of which are "headless"--they don't have video outs, you control them over your network. Go with at least a 500w supply, and if you might have the need for a dual-head system--two monitors are GREAT, don't let anyone tell you different--go with a 1200w supply.
They can be as loud, as the amp is not delivering 600 watts. The 10" sub rated at 600 watts is able to withstand more power.
Most computer use anything from 300 watts to 1200 watts.
yes. because the more storage, the more ability the computer has.
Yes, theoretically you can power up a laptop with a 65 watt power adapter using a 300 watt DC to AC inverter, as the laptop will only draw the power it needs (65 watts). However, it's important to ensure that the inverter has low voltage and overload protection to prevent any damage to the laptop or the inverter itself during operation.
No, the 300 watt low voltage transformer will not be able to power 150 watts of bulbs 250 feet away. The voltage drop over the distance will be significant and may not provide sufficient power to light up the bulbs effectively. It is recommended to use a higher wattage transformer or install additional transformers closer to the bulbs.