No, it would be measured in cubic feet.
An area is measured in square units, so for lengths measured in feet, the area would be measured in square feet.The surface area of a box, is just the sum of the areas of each face, each of which is measured in square units.
At 6 in deep, 8000 square feet; At 1 ft deep, 4000 square feet; At 2 ft deep, 2000 square feet. You cannot convert volume (cubic ...) to area (square ...) without dividing by a dimension
The volume of the toy box in cubic yards is (1/3). To convert this to cubic feet, we multiply by 27 (the conversion factor from cubic yards to cubic feet), giving us a volume of (9) cubic feet.
Square feet are used to measure the surface area of an object e.g. the surface of a table that is 3 feet wide and 4 feet long has a surface area of 4 x 3 = 12 square feet. Cubic feet are used to measure the volume an object takes up e.g. the volume of a chest freezer that is 4 feet long, 3 feet high and 2 feet deep is 4 x 3 x 2 = 24 cubic feet.
Square feet and cubic meters are two different units of measure. Square feet measures area (2-dimensional) while cubic meters measures volume (3-dimensional). To convert square feet to cubic meters, you would need to know the height of the space in feet. Without the height, it's not possible to accurately convert square feet to cubic meters.
No, a box cannot have a volume of 2 square feet because volume is measured in cubic units, not square units. Square feet measure area, which is a two-dimensional measurement, while volume measures three-dimensional space. The correct unit for the volume of a box would be cubic feet.
An area is measured in square units, so for lengths measured in feet, the area would be measured in square feet.The surface area of a box, is just the sum of the areas of each face, each of which is measured in square units.
No box can have a volume of 81 ft because volume cannot be measured in feet.A box with a volume of 81 CUBIC feet could be 1 ft * 1.5 ft * 54 feet.
392ft3If there are three dimensions, the figure is three dimensional (a box). I has volume, which is measured in cubic feet, ft3.V = 7x7x8 = 49x8 = 392 cubic feet.
Volume is measured in cubic measurements, such as m3, cm3, ft3, etc... .
If it is a rectangular box, then volume = length*breadth*height, where each is measured in inches. If it is a cylindrical box, then pi*radius2*height, where the radius and height are measured in inches.
The amount of space a box takes up is determined by its volume, which is calculated by multiplying its length, width, and height. The volume of the box is typically measured in cubic units such as cubic inches or cubic feet.
Volume of box: 3*5*2 = 30 cubic feet
Volume in cubic feet = Length in feet * Width in feet * Height in feet.
10,000 square feet.
300% The volume of the original box is ?. The volume of the box with the length and depth doubled is ?. The amount of change in volume is 60 - 15 = 45. The percent change is the amount of change in volume divided by the original volume:
At 6 in deep, 8000 square feet; At 1 ft deep, 4000 square feet; At 2 ft deep, 2000 square feet. You cannot convert volume (cubic ...) to area (square ...) without dividing by a dimension