answersLogoWhite

0

Yes, as long as the fuse or circuit breaker is rated for the smallest wire in the circuit, which in this case appears to be the 14 guage. Suppose the 14 guage is rated for 15 amps and the the 12 guage is rated for 20, and there is a 20-amp breaker on the circuit. Now suppose you have a short that draws 18 amps. The 14 guage wire will burn and catch fire, yet the breaker will not trip. That could be dangerous.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Natural Sciences

What extension cord is best for a shop vac?

For a shop vac, it is recommended to use a heavy-duty extension cord rated for outdoor use. Look for a cord that is at least 12-gauge to handle the power requirements of a shop vac, and choose a length that allows you to reach all corners of your workspace without excess cord. Make sure the extension cord has a grounded plug for safety.


How do you use an extension cord to temporarily run the filter?

It is never as good idea to run an extension cord to a high drain appliance like an electric motor. However if you must for a temporary situation.. use a good 10 or 12 gauge heavy cord and not more than like 25 feet.. DO NOT use a cheap 16 Ga cord from walmart... your pump and the cord will get VERY hot and that can be dangerous for both you and the pump


14 gauge extension cord will this work for microwave?

yes but could get hot or break the microwave.Look to see how many amps your microwave is.Also figure out what size breaker the outlet you are using is onlarger the wire in ext. cord the better especially at long distances.14 gauge = 15 amps12 gauge = 20 amps15 amp outlet with 12 gauge cord = 15 ampsI would use a 20 amp outlet with a 12 gauge ext. cordif going a long distance say 100 feet than better to have 10 gauge on 20 amp.your voltage goes down the longer the cord but with bigger wire it does not drop as fast.


What size extension cord should you use for your 120 volt 1725 watt iron?

#16 <<>> To load an extension cord to 1725 watts depending on the length of the cord, the bare minimum should be #14. A better size cord and my recommendation would be a #12 wire size extension cord.


How long can you run an electric extension cord?

It depends on the gauge of the wire, the length and the total current draw of the appliances. You said "heavy duty outdoor extension cord" so I'll assume 12 gauge wire. You can run a MAXIMUM of 20 amps for a MAXIMUM of 100 Ft on that wire. If the current draw goes up, so should the wire size. If the distance goes up, so should the wire size. 10 Ga wire - 30 amps for 100 Ft.

Related Questions

When should you use a 10 gauge Extension Cord or a 12 gauge Extension Cord in construction?

When the outlet is more than 40 feet away, or when you are operating 2 or more tools from it.


What gauge extension cord should I use for outdoor power tools?

For outdoor power tools, use a 12-gauge extension cord to ensure safe and efficient power delivery.


Can you connect a 6 outlet power bar to an extension cord?

There are several variables:First and most important, what will be the current draw? If the total number of amps exceeds the rating of either the power strip or the extension cord you're creating a fire hazard.Second, the wire gauge and length of the extension are important. You will loose voltage over distance and that is a function of the current draw, wire type and wire gauge. If you're trying to run 20 amps, don't use any less than a 12 gauge extension cord up to a maximum of 100 Ft. 15 amps, minimum 14 gauge.


What extension cord is best for a shop vac?

For a shop vac, it is recommended to use a heavy-duty extension cord rated for outdoor use. Look for a cord that is at least 12-gauge to handle the power requirements of a shop vac, and choose a length that allows you to reach all corners of your workspace without excess cord. Make sure the extension cord has a grounded plug for safety.


What is the recommended extension cord size for outdoor power tools?

For outdoor power tools, it is recommended to use a heavy-duty extension cord that is at least 12 gauge and 50 feet long to ensure safe and efficient power supply.


What can I do about new Friedrich air conditioner's cord which is 2 feet too short looks ugly in reaching outlet does a 9' extension cord risk harming the unit violate the warranty?

I don't know about the warranty, but the unit will run fine using an extension cord IF you buy one that is heavy-duty. Look for a cord that is 12 gauge or even 10 gauge. If you use a 14, 16, or 18 gauge cord (these may be too small), the unit could be damaged.


How do you use an extension cord to temporarily run the filter?

It is never as good idea to run an extension cord to a high drain appliance like an electric motor. However if you must for a temporary situation.. use a good 10 or 12 gauge heavy cord and not more than like 25 feet.. DO NOT use a cheap 16 Ga cord from walmart... your pump and the cord will get VERY hot and that can be dangerous for both you and the pump


14 gauge extension cord will this work for microwave?

yes but could get hot or break the microwave.Look to see how many amps your microwave is.Also figure out what size breaker the outlet you are using is onlarger the wire in ext. cord the better especially at long distances.14 gauge = 15 amps12 gauge = 20 amps15 amp outlet with 12 gauge cord = 15 ampsI would use a 20 amp outlet with a 12 gauge ext. cordif going a long distance say 100 feet than better to have 10 gauge on 20 amp.your voltage goes down the longer the cord but with bigger wire it does not drop as fast.


What is the recommended length and type of extension cord for a hot tub to ensure safe and efficient operation?

For a hot tub, it is recommended to use a heavy-duty extension cord that is at least 12 gauge and no longer than 25 feet to ensure safe and efficient operation.


What length of lawn mower extension cord is recommended for efficient and safe use with a standard electric lawn mower?

For efficient and safe use with a standard electric lawn mower, it is recommended to use a 12-gauge extension cord that is at least 100 feet long.


What size extension cord should you use for your 120 volt 1725 watt iron?

#16 <<>> To load an extension cord to 1725 watts depending on the length of the cord, the bare minimum should be #14. A better size cord and my recommendation would be a #12 wire size extension cord.


What is the best way to find a reliable and durable short outdoor extension cord?

To find a reliable and durable short outdoor extension cord, look for one that is weather-resistant, has a high gauge rating (such as 12 or 14), and is made of heavy-duty materials like vinyl or rubber. Check customer reviews and ratings to ensure quality and reliability.