NO. Vented and unvented gas burners and logs are completely different in design and usage.
There are many ways one can convert GPS tracking. One can convert GPS tracking is by uploading different GPS track logs. These are also called GPS traces.
The first logs typically checked after an intrusion are the security event logs, firewall logs, and system logs. These logs would provide information on the nature of the intrusion, the affected systems, and potential indicators of compromise that would help in investigating and containing the incident.
Duraflame logs are made with a blend of waxes, including paraffin wax. This wax blend helps the logs burn efficiently and cleanly.
No. you have to change the nozzles for the burners and for the stove portion. The replacement nozzles generally come on the rear of the stove upper right or left corner on a small 2" strip. the nozzles are small with 6flat sides to allow tightening with a wrench. to gain access to the nozzles for the range top generally you have to lift the top,remove the burner, unscrew the propane nozzle and attach the natural gas nozzle. the natural gas nozzle has a larger orifice to allow the gas to pass through to the actual burner. the stove is a bit more complicated but can be done by anyone who is semi mechanically inclined.
Duraflame fire logs typically burn at temperatures ranging from 1,000 to 1,200 degrees Fahrenheit. These specially designed logs are engineered to provide consistent and efficient heat output for use in fireplaces and wood stoves.
yes it can, open damper in fireplace for drafting while gas logs are being used. As far as converting burners, NO. Ventless and vented burners and logs are different in design.
Well- you can't. Ventless is a different design. To try to do this would be extremely dangerous. And you can its about the perspective of the asking party. Did they mean "can you take a vented log set/ and burner and make it into a vent-less log set/ burner and just close the damper then yes that would be dangerous and cannot be done, however if the asking party just meant can they use the existing fire box, and using a vent-less burner then this would be safe and acceptable
Check the manufacturer's specifications or labels on the propane logs. Ventless propane logs do not require a chimney or flue for exhaust. Another way is to look for the presence of a control knob that adjusts the size of the flame, as this is common in ventless propane log sets.
All unvented gas logs must have a safety pilot. Also all vented gas logs that are for propane must have a safety pilot. Vented gas logs that use Natural gas do not require safety pilots as the pressure is half that of propane although I would still recommend safety pilots on all installs.
All unvented gas logs must have a safety pilot. Also all vented gas logs that are for propane must have a safety pilot. Vented gas logs that use Natural gas do not require safety pilots as the pressure is half that of propane although I would still recommend safety pilots on all installs.
EFireplaceStore and SpecialtyFireplaces are two online locations where one can purchase vented gas logs. They are also available from local hardware stores such as Lowe's and Home Depot.
ViveDecor.com has electric logs as well as "convert to gel" logs: .vivedecor.com/web/sitefiles/catland.asp?cat=12
First you must figure out if is a vented or non vented gas logs. Also you must inspect you fireplace to make sure it can use gas logs. Most fireplaces can use gas logs so you shouldn't face many changes.
The lifespan of propane gas logs depend on many different things. If the logs are 'vented gas logs' and made from heavy ceramic that take the flame directly will only last a given amount of hours until the heat of the LP breaks them apart, something like 2-3 years with normal use. A vented set using light weight ceramic fiber logs will last almost forever. If the logs are 'vent-free' they will last several years as well, until the burner burns up from the heat of the LP, but the logs themselves will last forever on any 'vent-free' gas log.
' e ' . . . the base of natural logs
Speaking natural logs, it's '1'.Speaking common base-10 logs, it can be represented symbolically but not written exactly.
x = 1/e where e is the base of natural logs.