0
if you mean that when you put together (make-up) the outlet and you have an extra wire that's not going to any other outlet or other source. yes. you can leave it in the back of the box.
if that wire is energized i recommend capping it with a wire nut.
if you are using that outlet to power up other outlets or devices "down-stream" from it, then, no. all the wires in the box generally should be attached to the device.
if there aren't enough terminals on the device wire-nut all the wires of like colors together and make a "pig-tail" off of them to connect to the device with just one wire.
as always and obviously: don't do anything with the circuit unless you're sure that there is no power on it. play safe!
What else can I help you with?
How do you know if clothes dryer is hard wired?
Hard wired means that there is no plug and receptacle in the circuit powering the dryer. What you will find is a metal jacketed cable that will come out of the wall or floor and go right into the dryer.
What is cooking range outlet?
It is a receptacle outlet wired into a home with the capacity to handle the amperage rating of the range. The cord on the range plugs into this receptacle to receive its power supply so that the range can operate.
What is a receptacle wiring tester?
A receptacle wiring tester is a device used to check the electrical wiring in a wall outlet or receptacle. It typically has indicator lights that show whether the outlet is wired correctly, such as checking for proper grounding and polarity. This can help identify potential electrical hazards or wiring issues.
What is receptacle?
A container or devise that holds something A "receptacle" in electrical jargon is what most people call an outlet. The above answer is correct in that it gets its name from the fact it holds something -- a plug. In pure electrical jargon, in the United States, an "outlet" is the box that contains a switch or receptacle or from which a fixture is wired. So when you read the NEC, an outlet is the box, not the device or equipment contained in the box.
What is a hard wired electrical installation?
Hard wired is where something (Like most ceiling light fixtures) are wired directly to the circuit breaker panel. This is apposed to something like a lamp or a vacuum that uses a plug going in to a wall outlet.
How do you convert a plug in fixture to a hard-wired fixture?
Disconnect it from the hard wired source and install a male plug on the fixture. Small blade is black hot, wider blade is white neutral.
How do you convert a 125 volt to a 120 volt receptacle?
You tell yourself the 125 volt receptacle is a 120 volt receptacle. They're the same thing.
When was Hard Wired created?
Hard Wired was created on 1995-09-25.
How can I properly wire a split wired receptacle in my home?
To properly wire a split wired receptacle in your home, you will need to connect the hot wires to the brass screws on the receptacle and the neutral wires to the silver screws. Make sure to break the tab connecting the two brass screws to separate the top and bottom outlets. It's important to turn off the power before working on the receptacle to avoid any accidents.
How do you know if clothes dryer is hard wired?
Hard wired means that there is no plug and receptacle in the circuit powering the dryer. What you will find is a metal jacketed cable that will come out of the wall or floor and go right into the dryer.
What is cooking range outlet?
It is a receptacle outlet wired into a home with the capacity to handle the amperage rating of the range. The cord on the range plugs into this receptacle to receive its power supply so that the range can operate.
How do you convert wired broadband to wireless?
get wireless router
How can I safely install a split-wired receptacle in my home?
To safely install a split-wired receptacle in your home, you should first turn off the power to the circuit you will be working on. Then, remove the existing receptacle and separate the tab connecting the two hot terminals. Connect the hot wires to each terminal, ensuring they are securely attached. Connect the neutral wires to the neutral terminal and ground wires to the ground terminal. Finally, carefully insert the receptacle back into the electrical box, secure it in place, and turn the power back on to test the installation.
What is a receptacle wiring tester?
A receptacle wiring tester is a device used to check the electrical wiring in a wall outlet or receptacle. It typically has indicator lights that show whether the outlet is wired correctly, such as checking for proper grounding and polarity. This can help identify potential electrical hazards or wiring issues.
Can you convert a wired sconce to battery operated?
how do I convert my electric wall sconce to battery operated
Which is the hot in a two prong receptacle?
The smallest slot is the hot side the larger slot is the neutral slot assuming the outlet was wired correctly.
What are the release dates for Hard-Wired - 2005?
Hard-Wired - 2005 was released on: USA: 16 April 2005 (CheapShot LA) (premiere)
