The connection plugs are quite different between the two voltages for one, and, even if you overcame that hurdle, there won't be enough current to run something that needs 230V to run when trying to power it up with only 115V. It would be like trying to pull a semi-truck with a lawnmower engine.
<><><>
As you needed to ask this question here the best advice anyone can give you is to call a licensed electrician for advice.
If the unit you're asking about was not supplied with a standard small US-style household power plug, then it is likely that it was not designed to be used on a standard 120 volt socket outlet.
Household electricity in the US is nominally 120 volts, not 115 volts.
If you are asking if it is possible to plug a 230 volt European appliance into a normal 120 volt household socket outlet, it may or may not be possible, depending on the information on its rating plate (on the back or on the side of the unit) or in any printed instructions that came with it. If you know the maker's name, it may be worth looking for the manufacturer's web site.
But any unit that is not suitable for use on a normal 120 volt household socket outlet - because, for instance, it requires a 240 volt supply - can only be used on a dedicated branch circuit having:
A licensed electrician will be able to give further advice about this matter.
For some iomportant additional information, please see the Related Question shown below.
<><><>
If you have any doubts about an answer that you get, check the answerer's bio by clicking on their name to check their qualifications.
As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized.
IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Yes, you can plug a 240v motor into a 230v outlet.
Yes, it can be and there is no problem at all Because most of the electrical appliances are made to work on 220v - 240v so it can also be plugged into a 240v outlet.
its ok..i found out that it can be done, as long as its not turned up to use more than 130amp.:)
yes, 31watt divide 240v equals to 0.13amps.
As of 2000, Australian power points supply AC 230v at 50hz. Pre-2000, it was 240v at 50hz.
It may not blow, but it will turn twice as fast and burn out very quickly. It is meant for 110 only. Check the sump pump. Some of them can be wired either 120v or 240v. If yours is like that, just wire the motor for 240v and plug it in.
Probably because years ago the voltage supply in most residential applications was 110/220V. It was increased to 120/240V to increase efficiency. If you use a heater element rated at 230V in a 240V application you will be "overvolting" it and will probably reduce the life of the element. If using an element rated at 240V in a 230V application you will be "undervolting" it and it will probably not get quite as warm as it is designed to.
Yes, it can be and there is no problem at all Because most of the electrical appliances are made to work on 220v - 240v so it can also be plugged into a 240v outlet.
Typically single phase motors go up to 10hp. Wouldn't be very efficient at about 100 amps. A 20hp 3 phase motor at 230v pulls 52 amps. The 10hp single phase 230v pulls 50 amps.
Yes it will. If you consider the variances in voltage that occur during the course of a day, at 230v rating you may be getting 240v coming in anyway. The 10v difference is less than 5% and any appliance worth it's salt will handle this no problem.
Yes, electronic products need to work over a range of voltages as the mains is not maintained at exactly 240V or 230V. Typically they have a range of at least 10% and normally much more. So it should work down to at least 216V.
Yes, you can use a 230 volt device on a 240 volt supply.
It's the same thing. To make it even more confusing... your power source is 220v.
no a 240V switch rated at 30amps may work ok but could be a problem with a motor or coil if the switch is not dc rated chances are the 240V switch opens far enough to break a 30 amp arc, even if its not fast enough
its ok..i found out that it can be done, as long as its not turned up to use more than 130amp.:)
AC voltage is 220v in Germany.Normal household appliances are 240v, some dual phase appliances such as cookers are 400v.
yes, 31watt divide 240v equals to 0.13amps.
As of 2000, Australian power points supply AC 230v at 50hz. Pre-2000, it was 240v at 50hz.