No, you don't use watts in fuses.
The average household fan used in US or Canada is about 35-50 watts.
A computer monitor typically uses around 30-60 watts of power.
For optimal performance and energy efficiency, it is recommended to use a PC monitor with a wattage between 20 to 30 watts.
Appliances have what is called a nameplate on them. Thisprovides model and serial number info., but also how much current, volts, and watts the appliance is rated for. You will need to read this in order to know how to size the overload protection. In America, the NEC requires two 20-Amp small appliance circuits in new or remodeled kitchens. The refridge circuit is generally on it's own 15-Amp circuit. The microwave (if built-in over the range) is also on it's own 15-Amp circuit. The dishwasher and disposal generally will share a 20-Amp circuit.
The typical wattage for closet lights depends on the person. Some want their closet lights to not be very bright, so they will choose something that has 20-30 watts. Some other people prefer something a little brighter, so they will choose 50 watts.
I'm assuming the electrical system is single phase, such as a home. If not, you need to hire someone to do the work for you. First, 6000 watts at 120v is 50 amps, so if your load is truly 6000 watts, 30 amps isn't enough. If your 6000 watts is 240v, which would draw 25 amps, then 30 amps is plenty. Ten gauge wire may not be placed an a breaker or fuse larger than 30 amps.
Ignition 30 watts, fans 30 watts, driving lights 30 watts, headlights 100 watts. Total about 200 watts.
A cigarette lighter fuse is normally a 15 or 20 amp fuse depending on what other accessories are using that circuit. I doubt that it is a 30 amp fuse. Maybe someone installed the wrong fuse.
In the glove compartment fuse box, its fuse position #30 and its a 20 amp fuse.
The blower motor could stop working if it blew the 20 amp fuse. That's probably the worst that would happen. You should replace it with a 30 amp fuse, if that is what's called for in your manual.
The average household fan used in US or Canada is about 35-50 watts.
It should work with a 20 amp, just not as long. Wipers use a fair amount of current so the factory puts a 30 amp in. Perhaps that particular 20 amp is bad or it blew as soon as you turned the wipers on.
The 1965 Chevrolet Impala SS fuse box requires a 20 amp fuse for the taillights. A 30 amp fuse can be used when a 20 amp fuse is not available.
A computer monitor typically uses around 30-60 watts of power.
For optimal performance and energy efficiency, it is recommended to use a PC monitor with a wattage between 20 to 30 watts.
Appliances have what is called a nameplate on them. Thisprovides model and serial number info., but also how much current, volts, and watts the appliance is rated for. You will need to read this in order to know how to size the overload protection. In America, the NEC requires two 20-Amp small appliance circuits in new or remodeled kitchens. The refridge circuit is generally on it's own 15-Amp circuit. The microwave (if built-in over the range) is also on it's own 15-Amp circuit. The dishwasher and disposal generally will share a 20-Amp circuit.
A typical electric pencil sharpener uses around 20-30 watts of power. This amount may vary depending on the size and type of the pencil sharpener.