answersLogoWhite

0

What else can I help you with?

Related Questions

Can you use a 10 volt power supply for a 9 volt keyboard?

Using a 10 volt power supply for a 9 volt keyboard is not a good idea. The higher voltage will cause damage to the keyboard, burning it out and making it useless.


Can you run 220 volt motor compressor a 380 volt supply using power inverter?

No 380 volts is too wide a spread to use a 220 volt motor on.


Can you use 110 volt printer with 220 volt?

You need a step down voltage transformer that converts 220 volt to 110 volt to use a 110 volt printer with 220 volt. You can get good quality transformers at East West International in Houston, TX. If you order online or over the phone, they can ship it to you in 2-3 business days.


Will 24VAC be compatible with a 24 volt power supply?

Yes, 24VAC and a 24 volt power supply are generally compatible, as they both provide 24 volts of power. However, it's important to ensure that the load being connected can accept AC voltage if you're using 24VAC.


Can you use a 120 volt power bar with 240 volts power supply?

No, but check the specification on the power bar to see what its maximum voltage rating is. There will be a bit of cord end cutting to get the right configuration for 240 volt equipment.


What will happen if I try to use a 19 volt power supply to power a 12 volt device?

You run the risk of permanently destroying the device. Some devices have a built-in regulator and can handle a higher voltage (within reason) but many devices don't. So, don't take a chance. Use a voltage regulator or a different power supply.


Why do i still have 12 volt when i use disconnect switch in my RV?

The RV has a 12 Volt DC power supply that operates all the 12 Volt DC items in your RV when your plugged in to 110 V AC.


What voltage is the power supply for a quest 2wire gateway model 2700HG-D?

The 2wire 2700 and 2701 models both use a 5.1 volt power supply rated 2 or 2.2 amps


Can you charge a 1.5 volt battery with a 5 volt power supply?

Charging a 1.5 volt battery with a 5 volt power supply is not recommended as it can potentially damage the battery due to overcharging. It is safer to use a proper battery charger designed for the specific type and voltage of the battery.


Can you use a cb radio with a 12 volt regulated 5 amp power supply?

Yes, you can use a CB radio with a 12 volt regulated 5 amp power supply as long as it meets the voltage and current requirements of the radio. Make sure the power supply can handle the CB radio's power consumption to avoid damaging the equipment. Additionally, ensure that the power supply is of good quality and can provide stable power output to prevent any interference with the radio signal.


Would you be able to use US 120 volt lights on UK 230 volt supply?

no


Can you use 110 volt batteries charger here in Australia?

Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.